Equipment Support > Hardware By Brand > Linksys > When IPv6 in GUI for Linksys E4200 TomatoUSB (non beta)?

When IPv6 in GUI for Linksys E4200 TomatoUSB (non beta)?

Sorry, I meant..

Do you know when it will be no longer beta firmware?

I think all that's missing now is a recompile with the appropriate K26 driver for the 5Ghz radio.
--
"The key to flying is falling and not hitting the ground."

reply to anon user
A Tomato version supporting the both radios in the E4200 has been out for a couple of months. While it is called Beta due to new additions being added (ie, VLAN, ip traffic, Monitor,Transmission, QOS, etc..) , in reality it is very stable and I have been running it on my E4200 for about 8 months. There are different firmware variants from Modders sharing code and creating firmware specific to their own needs but all use the original Tomato firmware as their base. For people who have been flashing firmware awhile Jon (Jonathan Zarate) was also the originator of "Tofu" firmware.

To start off if you want to try I would download from the link below. Later you should feel free to use other variants depending on your needs.
»www.4shared.com/dir/v1BuINP3/Toa···lds.html

Most active Tomato support can be found at Tomato support and you will have access directly to the Modders and users. I'm currently using the latest Toastman version tomato-E4200-NVRAM60K-1.28.2493MIPSR2-Toastman-VLAN-RT-N-VPN with no issues.

Pharma

reply to anon user
Good Luck!