Topic 'Re: guess i dont get it in Round Lake' in forum '' - dslreports.com http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26739686 en Wed, 19 Jun 2013 02:48:31 EDT Wed, 19 Jun 2013 02:48:31 EDT Re: guess i dont get it in Round Lake http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26746471 http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26746471 Mon, 09 Jan 2012 12:38:02 EDT Re: guess i dont get it in Round Lake http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26742498
Also, I don't know of any cable co's that are truly using GHz of bandwidth. The one I work for has all 1GHz equipment but still run at 860. I think the reasoning behind it is signal attenuation as you reach that 1GHz range over drops and in home cable that will begin to be a headache. If they can get away with 860 and use SDV id think it would be a bit more reliable and easier to keep customers in specs. Not to mention once all of the cable co's drop analog, thats a LOT of bandwidth that will be available. ]]> http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26742498 Sun, 08 Jan 2012 09:59:48 EDT Re: guess i dont get it in Round Lake http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26741500 said by tim tim tim:

Just because your area is upgraded to d3 doesnt mean all of the services are using it, the 10-20meg services are still going to be using d2.

that could be changing or it could become standard practice to switch EVERYTHING to D3 channel bonding even down to the lowest of the low economy packages.]]> http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26741500 Sat, 07 Jan 2012 21:36:42 EDT Re: guess i dont get it in Round Lake http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26741108 http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26741108 Sat, 07 Jan 2012 19:29:47 EDT Re: guess i dont get it in Round Lake http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26740003 http://www.dslreports.com/forum/Re-guess-i-dont-get-it-in-Round-Lake-26740003 Sat, 07 Jan 2012 13:13:02 EDT guess i dont get it in Round Lake http://www.dslreports.com/forum/guess-i-dont-get-it-in-Round-Lake-26739686 Freq/Power: 693.000 MHz 8 dBmV
Signal to Noise Ratio: 36 dB
Modulation: QAM256
Upstream
Freq/Power: 36.400 MHz 44 dBmV
Channel Type: DOCSIS 2.0 (ATDMA)
Symbol Rate: 5120 kSym/sec
Modulation: QAM64

Status
System Uptime: 11 days 17h:32m:18s
Computers Detected: 1
CM Status: Telephony-AC Power Iso OFF Reg Complete
WAN Isolation: OFF-Access to WAN is allowed and button is disabled
Time and Date: SAT JAN 07 10:39:50 2012 ]]> http://www.dslreports.com/forum/guess-i-dont-get-it-in-Round-Lake-26739686 Sat, 07 Jan 2012 11:41:51 EDT