| Prestige 623ME-T1, how can the "Call Direction" be cha Hello everybody
My 623me seized working a few days ago.
Error in Log:
ERROR netMakeChannDial: err=-3001, rn_p=19a9b3
Command "dev dial 1" on ZyNOS Level also fails with error message "Call out is not allowed" although the respective Remote Node Profile is "active" (acutally nothing was changed before the device stopped working properly).
According to Zyxel Docs error "-3001" means that the "remote node call direction is configured as incoming only."
There is no Option to change "Call Direction" to "incoming, outgoing or both" in the Remote Node Profile settings.
Is there a way to set the Call Direction to "outgoing" or "both" via the ZyNOS Command Interpreter? If yes, what are the necessary commands? If not, what other solutions would you suggest (appart from buying/getting a new ADSL modem *g*)?
Many thanks for your help in advance...
Kind regards from Switzerland
SchnurBino |
|
| Re: Prestige 623ME-T1, how can the "Call Direction" be Hi.
Check in Telnet menu 11 whether you have some setup in Schedule Sets or you have configured your user/password in incoming instead of outgoing.
To test, modify something there, save the node, then modify back to proper setup and save again.
Regards. |
|
