| Site2site Zywall 5 Hello,
We have many vpn connections with the USG 100.
Now we need to make a connection from a USG 100 to Zywall 5.
The VPN connection is active and i have added the vpn to the IPSEC zone on the USG 100. Usely this is enough to get acces.
On the zywall 5 i have not configured any routing.
I want both sides to get full network access.
At the moment i cannot ping anything on the other side.
USG 100:
192.168.1.1
255.255.255.0
subnet:
192.168.1.0
255.255.255.0
Zywall 5
192.168.2.254
255.255.255.0
subnet:
192.168.2.0
255.255.255.0
I have tried to add routings but it is unclear to me how to proceed.
i hope you can help me.
Barry |
|
| Are both ZyWALLs default gateway for their respective LANs |
|
| Yes |
|
 BranoI hate VogonsPremium,MVM
join:2002-06-25
Burlington, ON
kudos:3
 ·Bell Fibe
| On USG side you need to add policy route
Source: USG_LAN
Destination: Z5_LAN
Next-hop:
Type: VPN Tunnel
VPN Tunnel: Z5_LAN
And add firewall rule on USG side
From: IPSEC_VPN
To: ANY (or LAN1 or whatever is appropriate)
Destination: ANY (or whatever is appropriate)
Service: ANY
Access: Allow |
|
|
|
| That did the trick.
It works.
Thank you for your help! |
|
