RickStepPremium
join:2002-11-25
Hamilton, ON
kudos:1 | reply to wayjac
Re: [Internet] Sagemcom F@st 2864 usb printer If you know what the port is, other wise that printer, previously connected somewhere else won't work.
I have a networked Dell Colour laser with IP 192.168.0.xx - port 9100.
Also a Dell usb monochrome printer attached to a DLink NAS DNS-343. The printer is listed as a virtual device; no port number.
Windows can set the printer up for you.
Rick |
|
 wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | The original poster put this in the first postsaid by liaden:In the past I had this connected to my tomato router and it worked by adding a standard tcp/ip printer port at the router's ip address, setting the protocol to RAW, the port number to 9100 |
|
RickStepPremium
join:2002-11-25
Hamilton, ON
kudos:1 | said by wayjac:The original poster put this in the first postsaid by liaden:In the past I had this connected to my tomato router and it worked by adding a standard tcp/ip printer port at the router's ip address, setting the protocol to RAW, the port number to 9100
If the OP uses the tomato router, he/she has to connect the tomato router and change no setttings.
If he/she does NOT use the tomato router, AS I POSTED ABOVE.
Rick |
|
wayjacPremium,MVM
join:2001-12-22
Indy
kudos:1 | Yes, you are correct |
|
