| Eigrp questionHi All,
I was experimenting with my lab and eigrp protocol. I am runing eigrp between 3 routers but I cant see the eigrp in the routing table
R2#sh run
Building configuration...
Current configuration : 1378 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip cef
!
!
!
!
no ip domain lookup
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
key chain LAB$$$
key 1
key-string onmlk121
!
!
!
!
!
!
!
!
interface FastEthernet0/0
description LAB Connection via Telnet
ip address 10.200.1.2 255.255.255.252
ip authentication mode eigrp 165 md5
ip authentication key-chain eigrp 165 LAB$$$
duplex auto
speed auto
!
interface FastEthernet0/1
description LAB connection via telnet
ip address 10.200.1.5 255.255.255.252
ip authentication mode eigrp 165 md5
ip authentication key-chain eigrp 165 LAB$$$
duplex auto
speed auto
!
interface Serial0/0/0
no ip address
shutdown
no fair-queue
clock rate 2000000
!
interface Serial0/0/1
no ip address
shutdown
clock rate 2000000
!
router eigrp 165
network 10.200.1.0 0.0.0.3
network 10.200.1.4 0.0.0.3
network 10.200.1.8 0.0.0.3
no auto-summary
!
ip forward-protocol nd
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
line con 0
line aux 0
line vty 0 4
exec-timeout 10 30
login local
line vty 5 15
exec-timeout 10 30
login local
!
scheduler allocate 20000 1000
end
R2#sh ip ro
R2#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
10.0.0.0/30 is subnetted, 2 subnets
C 10.200.1.0 is directly connected, FastEthernet0/0
C 10.200.1.4 is directly connected, FastEthernet0/1
R2#
IP-EIGRP neighbors for process 165
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
1 10.200.1.1 Fa0/0 12 03:08:31 9 200 0 19
0 10.200.1.6 Fa0/1 14 03:08:31 1276 5000 0 18
R2#
Am I doing something wrong or is this normal?
Thanks |
 RyanG1Premium
join:2002-02-10
San Antonio, TX | reply to titan567
Also make sure the eigrp AS on each router matches. Its not like OSPF where its used as a process ID. They should all be set to 165 as in your config you posted or whatever AS you want.
Ryan
--
Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so. -Douglas Adams |
