| UV Realtime Stats How do you post UV Realtime stat screens from saved docs? |
|
| Just select "preview/attach" then select "upload attachments" select what you wanna upload then hit "upload" |
|
| Test UV Realtime stat upload. |
|
|
|
| stats |
|
| I would say you got something wrong with your line because for that close your max rate should be higher, that and the power level being what it is.
Probably bridge tap or bad connection. |
|
| I am 849' from the VRAD using 60 year old copper wire pair from home to VRAD. Inside home is all new Cat-5 wiring. |
|
 NuckfutsPremium
join:2003-10-18
Joliet, IL
 ·AT&T U-Verse
 ·DIRECTV
1 edit | Your bitloading graph looks fine and I would not worry about the power level as it is the same as mine. Is your homerun to the RG RJ11? I had a coax homerun and they switched it to single-pair and my power level went from 14.3 to 9.9-10 and was told not to worry about it. Mine runs flawless pretty much. Probably cannot sync you up any higher due to age of copper and your VRAD might be full also. When I first got U-Verse my max rate was 61,000 and since more people had gotten U-Verse in my subdivision over the years I have dropped to like 56,000. I am at 900' on 6 year old copper. If you had a bridge tap you would see a significant drop somewhere in the downstream. Your stats are very identical to mine. Don't listen to the Anon. |
|
| reply to Travis299
Those two pages of stats look great if you ask me. I would leave everything be unless your having connection problems/dropouts etc. If you could post your error table or elaborate more on how your connection has been that would be good. |
|
| reply to Nuckfuts
The wire from the outside box on the side of my home to the RJ11 jack to the RG is new along with all of the Cat-5 wiring. I am not having any problems other than the Black Cisco DVR reboot bug. I have enclosed the error log for reference. Thanks |
|
