 RyanG1Premium
join:2002-02-10
San Antonio, TX | reply to RyanG1
Re: [H/W] 3550-12T Fan modification heres the pics. i made a custom connector with a fan extension cable and rigged in a 5V regulator. Screwed it to one of the posts on each blower fan to prevent it from falling onto the board and to keep air going over it (generates some heat and is rather warm to the touch) and so far so good... it even shows the fans as OK status since they are spinning at the same speed
Switch#sh env all
FAN is OK
TEMPERATURE is OK
POWER is OK
RPS is NOT PRESENT
--
Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so. -Douglas Adams |
