dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
11
chex383
join:2003-03-13
Victoria, BC

chex383 to Eug

Member

to Eug

Re: [DSL] Horrible speeds on 25/7

Hi, yes my firmware is : v1.0.4.4R3WH

I am also noticing the modem reboot issue I am seeing in other threads on this version.

so I guess its an open issue right now?

Also, where do I go to get my line-stats on the web-interface on the modem? I couldn't find it.

Thanks, Stefan
said by Eug:

said by chex383:

no clue. I need to get that, and all my line-connection stats and see that everything is OK..

The firmware is listed on your modem's Utilities > System Setting page.

It's something like v1.0.4.4R3WH or 1.0.4.3EF-Stinger.

Eug
join:2007-04-14
Canada

Eug

Member

Bad firmware

said by Leathal:

Go around and cut your neibours cable lines shoul fix the speed problem! LOL

He's not on cable.
said by chex383:

Hi, yes my firmware is : v1.0.4.4R3WH

I am also noticing the modem reboot issue I am seeing in other threads on this version.

so I guess its an open issue right now?

Yes. Unfortunately, it's been a known issue for months now.

Also, where do I go to get my line-stats on the web-interface on the modem? I couldn't find it.

Go to 192.168.2.1 (or whatever IP address you've set your modem to), and look under the VDSL section. Press the little + if it's there. If not, you can check the page source. It's buried in there.

Also, if you're on Windows 7, you could try this greasemonkey script if necessary.

»[DSL] Cellpipe 7130: Greasemonkey script to show line stats
chex383
join:2003-03-13
Victoria, BC

chex383

Member

Hi: Here are my stats, I assume these are pretty good. 50M line-rate, 1500 ft loop-length.

Status > VDSL

Downstream line rate

VDSL2 Firmware Version: 6.12.0.5IK105012
VDSL2 Link Status UP
Downstream line rate: 30388 kbps
Upstream line rate: 9348 kbps
Bearer Downstream payload rate: 26920 kbps
Bearer Upstream payload rate: 8128 kbps
Downstream attainable payload rate: 46368 kbps
Downstream attainable line rate: 55560 kbps
Downstream Training Margin: 17.3 dB
Downstream delay: 0.7 ms
Upstream delay: 0.0 ms
Tx total power: -1.0 dbm
FE Tx total power: 13.7 dbm
VDSL Estimated Loop Length: 1695 ft
G.Hs Estimated Near End Loop Length: 1131 ft
G.Hs Estimated Far End Loop Length: 1527 ft