YMS @teksavvy.com |
to TwiztedZero
Re: Lamb stew: Much ado about mutton.Well....
I said it before, and I'll say it again :
GOD I HATE ROGERS. |
|
|
HiVolt Premium Member join:2000-12-28 Toronto, ON |
to TwiztedZero
said by TwiztedZero:Right now the SB_KOMODO-1.0.6.1-SCM00-NOSH appears stable. Sure we're getting T3 and T4 timeouts occassionally its not a dealbreaker yet. I don't get any, and with upstream power of 48dBmv which is bordering on marginal. Here's my log, with just those DHCP renew messages. Time Priority Code Message
Feb 26 2012 00:01:11 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 26 2012 00:01:11 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 25 2012 00:01:08 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 25 2012 00:01:08 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 24 2012 00:01:06 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 24 2012 00:01:06 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 23 2012 00:01:04 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 23 2012 00:01:04 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 22 2012 00:01:03 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 22 2012 00:01:02 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 21 2012 00:01:01 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 21 2012 00:01:01 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 20 2012 00:00:59 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 20 2012 00:00:59 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 19 2012 00:00:58 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 19 2012 00:00:58 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 18 2012 00:00:57 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 18 2012 00:00:57 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 17 2012 00:00:54 6-Notice D106.0 DHCP Renew - lease parameters tftp file-bpr0106xxxxxxxxxxxx0001 modified;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
Feb 17 2012 00:00:54 4-Error D103.0 DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xx:xx:xx:xx:xx:xx;CMTS-MAC=00:05:00:e2:20:be;CM-QOS=1.1;CM-VER=3.0;
|
|
|
jibby
Member
2012-Feb-25 9:51 pm
same here (minus the marginal upstream), only DHCP renews with that same Field invalid, no T3's or T4's
although, my 6120 always seems to timestamp things -4 hours or so - is everyone elses logs this way or just mine? |
|
HiVolt Premium Member join:2000-12-28 Toronto, ON |
HiVolt
Premium Member
2012-Feb-25 9:52 pm
said by jibby:same here (minus the marginal upstream), only DHCP renews with that same Field invalid, no T3's or T4's
although, my 6120 always seems to timestamp things -4 hours or so - is everyone elses logs this way or just mine? it logs in GMT time, not local time. |
|
TwiztedZeroNine Zero Burp Nine Six Premium Member join:2011-03-31 Toronto, ON |
to HiVolt
HiVolt is your modem pluged into the wall outlet for power, or into a UPS box? Just out of curiosity.
And I do wonder how much of a difference that might make. |
|
Teddy Boomk kudos Received Premium Member join:2007-01-29 Toronto, ON |
to TwiztedZero
For the record, I believe the SB6120 was released second half 2008, and here are firmwares listed in the revision history of 1.0.6.3, some may never have seen the wild: 1.0.6.3 1.0.6.1 1.0.5.2 1.0.5.1 1.0.5.0 1.0.3.5 1.0.3.4 1.0.3.3 1.0.3.2 1.0.3.0 (I have modems with this fw) 1.0.2.6 1.0.2.5 1.0.2.4 (I have modems with this fw. I think this is the one that Rogers pushed Jul-11 and caused lots of trouble for Teksavvy customers) 1.0.2.1 1.0.2.0 1.0.1.9 1.0.1.8 (may have issues in Mississauga? Lots of Teksavvy users reported functioning okay at some time on this though...) 1.0.1.7 (I have modems with this fw) 1.0.1.6 1.0.1.5 1.0.1.4 1.0.1.3 (I have modems with this fw) 1.0.1.2 1.0.1.1 1.0.0.7 1.0.0.6 1.0.0.5 1.0.0.4 1.0.0.2 1.0.0.1 SB6120s with P/N:545100-001-00 are easy to flash. You do have to open them up, solder a a serial cable, and have a TFTP server and copy of the firmware image. SB6120s with P/N:545100-009-00 do not have serial port pads on the PCB, so I suspect you have to flash with a JTAG and test clip. Please list any other known P/Ns and if they have serial headers on the PCB said by TwiztedZero:The SB6120 has been around for nearly a decade now A decade?!?! |
|
TwiztedZeroNine Zero Burp Nine Six Premium Member join:2011-03-31 Toronto, ON |
lulz g0t me! | --*pulls pants up*-- | ! ~ Half ~ ! a decade (nearly)
... oh and *whew* U didn't mention the 'orrible problems our neighbors down south had when c0mcast b0rked a lotta SB6120's in that market with a firmware build that bricked a lot of theirs. |
|
HiVolt Premium Member join:2000-12-28 Toronto, ON |
to TwiztedZero
said by TwiztedZero:HiVolt is your modem pluged into the wall outlet for power, or into a UPS box? Just out of curiosity.
And I do wonder how much of a difference that might make. Into a UPS, as is all my computer & network gear. |
|
Teddy Boomk kudos Received Premium Member join:2007-01-29 Toronto, ON |
to TwiztedZero
said by TwiztedZero:U didn't mention the 'orrible problems our neighbors down south had when c0mcast b0rked a lotta SB6120's in that market with a firmware build that bricked a lot of theirs. I don't know about it. Link? I'd love to buy some of those units cheap |
|
Yoorie join:2011-11-22 Toronto, ON |
to the cerberus
Re: Where can I find the Motorola SB6121 (Firmware : 1.0.6.1) ??I have a SB6121 running firmware SB612X-1.0.5.1-SCM00-NOSH and it appears to be running fine. Got it from Newegg.ca.
I am getting a similar log to HiVolt's, though. How bad is it to have those errors? My modem gets disconnected at night sometimes, but it happens very rarely and lasts for a minute or two. |
|
Teddy Boomk kudos Received Premium Member join:2007-01-29 Toronto, ON |
said by Yoorie:I have a SB6121 running firmware SB612X-1.0.5.1-SCM00-NOSH and it appears to be running fine. Got it from Newegg.ca.
I am getting a similar log to HiVolt's, though. How bad is it to have those errors? My modem gets disconnected at night sometimes, but it happens very rarely and lasts for a minute or two. I'm thinking not a big deal at all, unless you move. Are you already on upstream channel bonding in your area? If not, Rogers might change equipment on you to upgrade the service, and that might cause you trouble as well. Not that either moving or Rogers upgrades will cause you trouble, very unlikely in fact.. Sounds like you are working well enough at the moment. |
|
Gimli Premium Member join:2006-01-03 l5a2o4 |
Gimli to YMS
Premium Member
2012-Feb-27 4:17 pm
to YMS
said by YMS :I'm willing to pay up to $100 for a new SB6121 that will work on Teksavvy's network.
LoL - I can do that price if you want a few.... Have lots of People on 6121's on Tek cable |
|
HiVolt Premium Member join:2000-12-28 Toronto, ON |
to Yoorie
said by Yoorie:I have a SB6121 running firmware SB612X-1.0.5.1-SCM00-NOSH and it appears to be running fine. Got it from Newegg.ca.
I am getting a similar log to HiVolt's, though. How bad is it to have those errors? My modem gets disconnected at night sometimes, but it happens very rarely and lasts for a minute or two. Those errors don't matter, safely ignore them. |
|
|
rogersucks
Anon
2012-Feb-28 9:05 pm
Will teksavvy activate if I have firmware 1.0.5.1?, got mine from newegg also. |
|
Gimli Premium Member join:2006-01-03 l5a2o4 |
Gimli
Premium Member
2012-Feb-28 11:21 pm
said by rogersucks :Will teksavvy activate if I have firmware 1.0.5.1?, got mine from newegg also. yes |
|
|
to YMS
I have a SB6120 with firmware 1.0.3.3. Want to get teksavvy in Quebec ( from videotron). Will it works or not ?
Thanks ! |
|
YMS @teksavvy.com |
YMS to Gimli
Anon
2012-Mar-2 10:08 am
to Gimli
It would be brand new? Retail box? All literature & CD? If so, I would have to have it activated (up and running smoothly) before I make payment so there's a bit of trust involved in this whole thing.
I don't want to pay for it and get stuck with an expensive paper weight. |
|
Gimli Premium Member join:2006-01-03 l5a2o4 |
Gimli
Premium Member
2012-Mar-2 5:17 pm
said by YMS :It would be brand new? Retail box? All literature & CD? If so, I would have to have it activated (up and running smoothly) before I make payment so there's a bit of trust involved in this whole thing.
I don't want to pay for it and get stuck with an expensive paper weight. i would PM you but you are unregistered. |
|
YMS @teksavvy.com 1 edit
-1 recommendation |
YMS
Anon
2012-Mar-2 6:43 pm
You can send me an e-mail to : worldjupiter at yahoo.ca
Cheers. |
|
|
to YMS
I've read through and noted that no one has actually explained HOW to check your current firmware revision. Here's how:
[1] Connect your Surfboard SB6120/SB6121 cable modem directly to your computer via an Ethernet cable. (No intermediary router, No cable connection is required)
[2] Open a browser and browse to: 192.168.100.1 The Motorola Surfboard Status page should open up.
[3] Click on the 'Help' tab. Third line down it lists your Firmware name. Mine reads: 'Firmware Name: SB612X-1.0.5.1-SCM00-NOSH'
That's it. |
|
TwiztedZeroNine Zero Burp Nine Six Premium Member join:2011-03-31 Toronto, ON |
You can post in the direct forum and ask to have the current SB_KOMODO-1.0.6.1-SCM00-NOSH pushed out to you. Might work. or try a Gui boot via » 192.168.100.1 in the configuration tab, where it says [Restart Cable Modem] |
|
Teddy Boomk kudos Received Premium Member join:2007-01-29 Toronto, ON |
to YMS
For the record, I can now flash these. I also have some used units with good firmware available. Just send pm anytime |
|
TwiztedZeroNine Zero Burp Nine Six Premium Member join:2011-03-31 Toronto, ON |
said by Teddy Boom:For the record, I can now flash these. I also have some used units with good firmware available. Just send pm anytime Visualizes Teddy Boom standing in his workshop wearing a trench coat and having an "audience" of a coupple hundred SB6120's gawking at him while he "Flashes" them. OMGz whats been seen can't be UnSeen! Is glad I'm not "There" I'd go blind.
|
|
|
to YMS
Incidentally, I am going through this whole process right now, and I'm going to request that TekSavvy switch over my modem anyways, despite not having the correct firmware revision [Currently: SB612X-1.0.5.1-SCM00-NOSH].
I'll report back how it goes.
(If that doesn't work, I'll take your offer and try flashing the firmware myself) |
|
YMS @teksavvy.com |
to Teddy Boom
If I purchased a NEW Motorola SB6121 from my own source, how much would you charge to flash it?
Are you in the GTA, and how long would this process take? Lastly...how many have you done? |
|
TwiztedZeroNine Zero Burp Nine Six Premium Member join:2011-03-31 Toronto, ON |
@YMS Do you really want a fella in a trench coat flashing your innocent little modem? J/K |
|
Teddy Boomk kudos Received Premium Member join:2007-01-29 Toronto, ON |
to YMS
said by YMS :If I purchased a NEW Motorola SB6121 from my own source, how much would you charge to flash it?
Are you in the GTA, and how long would this process take? Lastly...how many have you done? Why ask these questions as an anon? I mean... I don't intend to be mysterious, but then I see the mystery in your questions and I just wonder if it is worth bothering Just pm, you'll get all the info... |
|
Teddy Boom |
Okay okay, I just can't do mystery...
Bathurst and College.
Hardly any at this point, only got the equipment a few days ago.
I'd charge $10/modem for 1-3, cheaper in bulk.
Why do you want a new SB6121 when you can get a used but guaranteed working SB6120 from me? Then there is less risk, because I will have already flashed it :P
Seriously though, it works very easily, and I'm way over qualified for this kind of work, so...
Anyway, just pm guys, makes more sense than doing it in the open forum. |
|
TwiztedZeroNine Zero Burp Nine Six Premium Member join:2011-03-31 Toronto, ON |
said by Teddy Boom:Why do you want a new SB6121 when you can get a used but guaranteed working SB6120 from me? Then there is less risk, because I will have already flashed it :P *Bold, mine. So these "used but working" units, have they been employed on the robbers network previously and have they been deprovisioned by robbers allready? Or are these purchased units from the U.S. through such factions as kijiji, eBay etc... that were formerly provisioned on entire other U.S. networks in the past? Hopefully they didn't "fall off" a truck or got "diverted" in any way thats not kosher. Just asking, not making accustations. The cat wants to know, they're the curious sort yanno |
|
Teddy Boomk kudos Received Premium Member join:2007-01-29 Toronto, ON 1 edit |
sure EDIT (because Merovingian sent me a pm) ----- It is my business, I deal in surplus electronics all the time. Nothing unusual about it. Maybe if you have a more specific concern I could elaborate on it.. |
|