| reply to claykin
Re: USGs firmwares said by claykin:Anyone know if the Endpoint Security (EPS) check now supports checking x64 Windows OS? In V2.x of Zynos x64 OS would walk right by the security check.
It doesn't sound like it according to the release notes:
EPS (Endpoint Security)
1. [SPR: 090805245]
[Symptom] PC OS is 64 bits. EPS always fail when checking Firewall, Anti-virus and Windows auto update.
We current not support EPS on Windows 64bit Operation System. |
|
1 edit | reply to superataru
Has anyone successfully done a downgrade to 2.21?
The downgrade (page 44 of the Firmware Release Note) does not work. The old 2.21 has problems, for instance the log is not shown.
With the use of some browsers (Safari, IE9) and some "reboot" from the Console it works!
The procedure on pages 46 - 50 leads to the same problems. |
|
| And did anyone notice the wireless card slot loss some signal strength?
With the 2.x firmware I could login via wifi or browse, but with 3.0 browsing is very slow and logging in via wifi is very slow.
I changed setting to auto and also to different settings. I.e 2, 4, 5, 7 and 8 with no change in speed. If I'm closer to the router the speed is ok.
Any ideas on this one?
Thanks |
|
| reply to superataru
Hi if you want to download firmwares for ZyXEL devices you can find all firmwafes for all ZyXEL devices in:
»ftp://ftp.zyxel.com/
Good day |
|
| reply to superataru
Hi agian if someone want to see the new ZyXEL firmware for USG - ZLD 3.0. just look look this link: »www.zyxel.hu/download/zld3/ |
|
|
|
| reply to superataru
Just bit the bullet and had a clean upgrade of my USG 50 from 2.21 (BDS.5) to 3.0. I haven't tested any of the VPN stuff out, but basic functionality and WAN failover seem to be working just fine. |
|
claykin
join:2003-08-22
Fort Lauderdale, FL | reply to polarisdb
Am I the only one that believes EPS is worthless without 64 bit OS support? How many people live in an entire 32 bit world and have only 32 bit guests visiting and connecting to their LAN?
said by polarisdb:said by claykin:Anyone know if the Endpoint Security (EPS) check now supports checking x64 Windows OS? In V2.x of Zynos x64 OS would walk right by the security check.
It doesn't sound like it according to the release notes: EPS (Endpoint Security) 1. [SPR: 090805245] [Symptom] PC OS is 64 bits. EPS always fail when checking Firewall, Anti-virus and Windows auto update. We current not support EPS on Windows 64bit Operation System. |
|
 GorkOu812ic
join:2001-10-06
Bountiful, UT
 ·magicjack.com
2 edits | said by claykin:Am I the only one that believes EPS is worthless without 64 bit OS support? Well, not necessarily worthless I'd think - but certainly shows a lack of understanding or caring about the direction the market is going.
I took the plunge and upgraded the f/w on my 20W. No issues so far, other than some weird GUI issues I attribute to IE caching problems. I've ironed those out now, I think.
said by JimThePCGuy:Looks like I will be receiving nag screens on those subscription services I never signed up for. Yeah, boo!  |
|
 AnavSarcastic Llama? Naw, Just AcerbicPremium
join:2001-07-16
Dartmouth, NS
kudos:3 | reply to superataru
First requested 3.01 feature, make NEVER an option for the nag screen LOL. Upgraded USG100, no issues thus far. |
|
| said by Anav:First requested 3.01 feature, make NEVER an option for the nag screen LOL. Upgraded USG100, no issues thus far.
It would be nice even if that could be toggled off at the CLI. |
|
GorkOu812ic
join:2001-10-06
Bountiful, UT | reply to Anav
lol And second requested 3.01 feature - update dydns every 28 days so free accounts aren't closed every month. |
|
| reply to polarisdb
said by polarisdb:Just bit the bullet and had a clean upgrade of my USG 50 from 2.21 (BDS.5) to 3.0. I haven't tested any of the VPN stuff out, but basic functionality and WAN failover seem to be working just fine.
VNC, RDP, and a URL application are all working fine with the SSL VPN for me. My remote access IPSEC VPN connected with no issues using the Shrewsoft client, but I'm not able to ping or ssh to LAN1 addresses anymore but VNC was working fine. I wonder if my policy route that worked with 2.2 isn't 3.0 friendly? I don't have a site-to-site setup, so I can't confirm the bug that others have been seeing. |
|
 stefaanEPremium
join:2002-07-10
9657
kudos:1 | reply to Anav
said by Anav: Upgraded USG100, no issues thus far.
Did the same, running without issues for more than a day now. I enabled IPv6, but my ISP seems to support IPv6 only only their own router (Fritzbox).
Stefaan
--
"Technically, Windows is an 'operating system,' which means that it supplies your computer with the basic commands that it needs to suddenly, with no warning whatsoever, stop operating." -Dave Barry |
|
 BranoI hate VogonsPremium,MVM
join:2002-06-25
Burlington, ON
kudos:6 | reply to superataru
I've just upgraded my USG200 and everything seems to be working after 5 minutes ...hoping it will stay this way  |
|
BranoI hate VogonsPremium,MVM
join:2002-06-25
Burlington, ON
kudos:6 Reviews:
 ·Bell Fibe
| reply to polarisdb
said by polarisdb:said by claykin:Anyone know if the Endpoint Security (EPS) check now supports checking x64 Windows OS? In V2.x of Zynos x64 OS would walk right by the security check.
It doesn't sound like it according to the release notes: EPS (Endpoint Security) 1. [SPR: 090805245] [Symptom] PC OS is 64 bits. EPS always fail when checking Firewall, Anti-virus and Windows auto update. We current not support EPS on Windows 64bit Operation System. Yeah, this day and age this really sucks. |
|
Zemplar
join:2011-11-22
Lake Mary, FL | reply to superataru
Another USG 20W upgraded w/o any observed issues. Time will tell how useful IPv6 support will be (enabled manually). |
|
 meowBB
join:2002-01-21
Hayward, CA | reply to Brano
said by Brano:I've just upgraded my USG200 and everything seems to be working after 5 minutes ...hoping it will stay this way
I don't see the the v3 firmware for USG200 in the ftp site.
»ftp://ftp2.zyxel.com/ZYWALL_USG_200/firmware/
Are you using the beta? |
|
BranoI hate VogonsPremium,MVM
join:2002-06-25
Burlington, ON
kudos:6 | Few posts above, get it from our Hungarian ZyXEL friends »www.zyxel.hu/download/zld3/ |
|
meowBB
join:2002-01-21
Hayward, CA | But is it official release version? |
|
BranoI hate VogonsPremium,MVM
join:2002-06-25
Burlington, ON
kudos:6 Reviews:
·Bell Fibe
| Seems to be
quote:
3.00(AQU.0) / 2012-02-17 16:50:38
You can always compare the .bin files once it shows on US ftp servers.
I would not worry that this is some kind of fake, USG firmwares are zipped with very strong password. The zld_fsextract update command then verifies the zip and unzips is before applying the update. For somebody to fake the firmware they must know how to generate the proper password (each update has different password) ... just watch console output during update if you're curious. |
|
