dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
63
share rss forum feed


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to piperj

Re: Configuring router (ASUS RTN66U) behind router (2Wire 1701)

Do you want to use just the wireless of the asus and let the 2wire be the router/modem

piperj

join:2006-01-16
El Dorado Hills, CA
Thanks for the insight and tips wayjac. Because of ASUS hardware specs I would like for it to do as much as possible. Will try it tomorrow. 2Wire in normal to ASUS LAN port in DMZ. Since I don't think I can turn the 2wire wireless off I will set it to a low channel and turn the power all the way down. I'll post results tomorrow.


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
said by piperj:

Because of ASUS hardware specs I would like for it to do as much as possible. 2Wire in normal to ASUS LAN port in DMZ

Since the 2wire uses the 192.168.1.0 subnet the asus will need to use a different subnet like 192.168.2.0
said by piperj:

Since I don't think I can turn the 2wire wireless off I will set it to a low channel and turn the power all the way down. I'll post results tomorrow.

The 2wire wireless radio can be disabled
Go to this 2wire page
192.168.1.254/xslt?PAGE=C0
Click the disable button next to wireless

piperj

join:2006-01-16
El Dorado Hills, CA
Ahh - right you are about that Disable button at 192.168.1.254/xslt?PAGE=C01 (looked at that screen hundreds of times, but never "saw" that button).

It's kinda moot now - Ever notice the note on the 2Wire Edit Firewall Settings screen "Once DMZplus mode is selected and you click DONE, the system will issue a new IP address to the selected computer." Seems that when the ASUS is in its default Wireless router mode it will not accept the IP assignment when the 2Wire tries to put it in the DMZ.

Fortunately, on the ASUS Administration - Operation Mode screen, the other selectable mode is Access Point (AP) mode. That screen also states "In AP mode, the firewall, IP sharing, and NAT functions are disabled by default. RT-N66U IP will be different after changing to Access Point mode." So with one click and a LAN port to LAN port cable all is well.

This is not the topology I was envisioning, but it is actually working out quite well. With cell phones, security camera, multiple computers, Wii, Roku, DDWRT/Linksys wireless bridge, etc. I have 11 wireless devices on my home network. So now I have three wireless bands to carry the appropriate traffic.

The 2Wire seems more stable with the lighter wireless load.

BTW - the ASUS is expensive, but it is one sweet device! Rich administration screens, Samba share screen for attached USB drives, FTP share to USB drive with account and permission control, DLNA media server and built in clients for Bit Torrent, NZB, and aMule downloads directly to the attached USB drive! I did a quick wireless transfer speed test by transferring a 1GB folder (pictures and movies) with 2.4 GHz n adapter from my desktop - it took 5 min. 34 sec. The same folder on my laptop only took 3 min. 38 sec. through a 5 GHz n adapter. Also, a call to tech support last Friday went straight through to an understandable, knowledgeable technician (of course after I got through the answering system menu).

They are hard to find online, and I was surprised to find one last week on the shelf at a local Fry's.


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
said by piperj:

Ever notice the note on the 2Wire Edit Firewall Settings screen "Once DMZplus mode is selected and you click DONE

After clicking the done button you must release and renew the wan/public ip address of the router, If you don't do that the router will keep using the private ip address until the private ip address lease expires