El Dorado Hills, CA
Ahh - right you are about that Disable button at 192.168.1.254/xslt?PAGE=C01 (looked at that screen hundreds of times, but never "saw" that button).
It's kinda moot now - Ever notice the note on the 2Wire Edit Firewall Settings screen "Once DMZplus mode is selected and you click DONE, the system will issue a new IP address to the selected computer." Seems that when the ASUS is in its default Wireless router mode it will not accept the IP assignment when the 2Wire tries to put it in the DMZ.
Fortunately, on the ASUS Administration - Operation Mode screen, the other selectable mode is Access Point (AP) mode. That screen also states "In AP mode, the firewall, IP sharing, and NAT functions are disabled by default. RT-N66U IP will be different after changing to Access Point mode." So with one click and a LAN port to LAN port cable all is well.
This is not the topology I was envisioning, but it is actually working out quite well. With cell phones, security camera, multiple computers, Wii, Roku, DDWRT/Linksys wireless bridge, etc. I have 11 wireless devices on my home network. So now I have three wireless bands to carry the appropriate traffic.
The 2Wire seems more stable with the lighter wireless load.
BTW - the ASUS is expensive, but it is one sweet device! Rich administration screens, Samba share screen for attached USB drives, FTP share to USB drive with account and permission control, DLNA media server and built in clients for Bit Torrent, NZB, and aMule downloads directly to the attached USB drive! I did a quick wireless transfer speed test by transferring a 1GB folder (pictures and movies) with 2.4 GHz n adapter from my desktop - it took 5 min. 34 sec. The same folder on my laptop only took 3 min. 38 sec. through a 5 GHz n adapter. Also, a call to tech support last Friday went straight through to an understandable, knowledgeable technician (of course after I got through the answering system menu).
They are hard to find online, and I was surprised to find one last week on the shelf at a local Fry's.
said by piperj:After clicking the done button you must release and renew the wan/public ip address of the router, If you don't do that the router will keep using the private ip address until the private ip address lease expires
Ever notice the note on the 2Wire Edit Firewall Settings screen "Once DMZplus mode is selected and you click DONE