dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
6619
share rss forum feed

btinmo

join:2012-03-05
Mountain Grove, MO

[Exede] Login to router Surfbeam 2

How can I log to the modem. Its hooked up to a router and showing a ip like 184.63.11.125 I tried 184.63.11.1, 184.63.11.0. Not sure how I can access it or find the correct ip. My network runs on 192.168.100.1


DrStrangLov

@12.189.32.x
said by btinmo:

Not sure how I can access it or find the correct ip

Piece of Cake: Hook direct to ViaSat Modem, and run speed test, and look at modem's menu via IP number listed above.


MrD1402

@wwest.net
And VOID your warranty. Nobody has any business logging into the modem.

marsh_0x

join:2006-04-25
Tomahawk, WI
MrD1402
Please explain your reply


xmas2000
Premium
join:2012-01-02
You cant change it in the modem! Just set your router to DHCP and it will use whatever the modem gives it.
--
Gigabyte MB | Intel i7 | 12GB DDR3 | SSD’s in RAID | 4TB Storage | Windows 8 consumer preview


Storm97
Premium
join:2003-04-14
Evanston, WY
reply to MrD1402
said by MrD1402 :

And VOID your warranty. Nobody has any business logging into the modem.

Logging into your modem to check your signal levels does NOT void your warranty... I do it on a daily basis when I am installing the Exede / WildBlue service... Even the installation page when we first provision them is based on the modem page! The modem defaults to 192.168.100.1 so if your network runs on that same block, you will need to either hook directly into the modem or change your IP range in your router.
--
Words of advice for today... "Be Happy, Drink Coffee, Drive Safe!"