|reply to meowBB |
Re: USG 100 3.0 - VPN Issues?
Some people, I among them, seem to have a working connection but a flawed routing, ending up with IPSec errors like
SPI:0x0 SEQ:0x0 No rule found, Dropping packet [count=152]
My routing is an incoming tunnel for Default_L2TP_VPN_Connection for any user, dest, etc. Next hop is Auto and DSCP masking set to preserve, and the SNAT is outgoing-interface.
This worked under 2.20. Can it be the culprit now?
I have the same issue, with an usg100 (3.00(AQQ.0) / 1.08) but routing from Lan1 to ipsecVPN.
Error / IPSec / SPI:0x0 SEQ:0x0 No rule found, Dropping packet [count=3] / 192.168.18.10 / 192.168.54.254
Policy Route was set from "any" to "net-54" and next hop to "vpn-tunnel" and "vpn-54"
Before changing the firmware version, it worked...