Equipment Support > Hardware By Brand > Cisco > [Config] [Cisco 1921] Outgoing NAT - Source NAT depending on the

reply to MathieuP

Re: [Config] [Cisco 1921] Outgoing NAT - Source NAT depending on

access-list 100 permit ip 192.168.0.0 0.0.0.255 host 9.9.9.9
access-list 101 deny ip 192.168.0.0 0.0.0.255 host 9.9.9.9
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
 
ip nat pool pool1 1.0.0.2 1.0.0.2 netmask 255.255.255.255
ip nat inside source list 100 pool pool1
ip nat inside source list 101 interface GigabitEthernet0/1 overload
 

Hey,

That you for answering... I had to wait before I could test.
...but it doesn't work.

I'm clueless now, and can't figure out how I can do that...
Any idea?

Thanks,
Mathieu.