dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
10

wayjac
MVM
join:2001-12-22
Indy

wayjac to goose1000

MVM

to goose1000

Re: [Xtreme] AT&T threaten me..I think!

There should be a all status link on the same page you used to view the stats
goose1000
join:2010-11-13

goose1000

Member

I think this is it the ATTNDR: Check out my loop length, that looks high doesn`t it?

Downstream Upstream
----------------------------------------
Interlv delay 64 2
LowestTone 32 6
HighestTone 197 22
TonesExcited 164 17

NetRate 3550 382
AggrRate 3566 395
TotalRate 3820 528
LineRate 4164 580
ATTNDR 5504 647

ACTATP 184 105
ACTPSD -367 -345
HLINSC 3046
Estimated loop length: 14480 feet (bridge tap)

NetFixer
From My Cold Dead Hands
Premium Member
join:2004-06-24
The Boro
Netgear CM500
Pace 5268AC
TRENDnet TEW-829DRU

NetFixer

Premium Member

said by goose1000:

Check out my loop length, that looks high doesn`t it?...

Estimated loop length: 14480 feet (bridge tap)

Yes, if your loop length were actually 14480 feet, it would be rather long for a 3 mbps connection (and the "bridge tap" would also seem to be a bit foreboding. However, it is not unusual for an inexpensive (inexpensive compared to real DSL test equipment) DSL modem to report both of those things incorrectly.

FWIW, I think you are looking in the wrong place again. Your problem is the noise on your telco line, it does not really appear to be a "DSL" problem (although a bridge tap ...if there is one... could be a potential entry point for noise).
goose1000
join:2010-11-13

goose1000

Member

Yea...I was just snooping around in the stats..I have not given up on the telco line yet. I got someone higher up than the local supervisor taking a look at it. Hopefully should hear something Monday or Tuesday.

wayjac
MVM
join:2001-12-22
Indy

wayjac to NetFixer

MVM

to NetFixer
I asked to see that info just to satisfy my curiosity
goose1000
join:2010-11-13

1 edit

goose1000

Member

How can I get an accurate loop length?

wayjac
MVM
join:2001-12-22
Indy

wayjac to goose1000

MVM

to goose1000
said by goose1000:

I think this is it the ATTNDR:

Yes, the 3347 attndr and the 2wire max rate are the same, different terms used to describe the same thing
said by goose1000:

Check out my loop length, that looks high doesn`t it?

Yes I think that figure is too high for the sync rate you have but the attndr figure contradicts that

I've found that the estimated loop length figures given by the motorola modems are close to the loop length figures given by att techs who have access to that type of info
wayjac

wayjac to goose1000

MVM

to goose1000
said by goose1000:

I can I get an accurate loop length?

A few years ago I requested that info in a post in the direct forum
goose1000
join:2010-11-13

goose1000

Member

Well I was on 1.5 before and had same disconnect issues as I am having now..I thought it would have been more stable connection but it did not matter by dropping speed.