dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
2168
share rss forum feed

Susheel_21

join:2012-04-02

[Help] Installing problem on Basic N150 adsl2+ wireless modem ro

I just got a basic n150 modem router. While on initial setup, i write down the network name (SSID) and password from network information card of the router. But it says the password is wrong, and there's a constantly blinking amber light in the router. it simply doesn't connect to the internet. I check all my connection from my adsl main line to the router, everything is fine. Have i got a damaged piece? plz helpp..


appusree

join:2012-04-05
680023

Re: [Help] Installing problem on Basic N150 adsl2+ wireless mode

You will have a flashing amber light on your router if nothing is plugged in to the yellow modem slot of the router. If thats already done then all you need to do is to unplug all the connections from your belkin router except the power and hard reset the router for about 30 seconds. If still it is the same you can get a replacement