|reply to Mike |
Re: How to setup N750 as a bridge
said by Mike:Will you be connecting the fvs338 and n750 using a ethernet cable
There is a Netgear Prosafe FVS338 wired (192.168~) and I want to add a N750 wired to extend the network's physical range
said by Mike:This is normal for netgear routers the wan and lan must use different subnets
On the initial setup the N750 detects 192.168.~ address and the FV338 subnet and makes it a 10.0~ network. I cannot connect to anything else that has a 192.168 address
I was told it's ethernet. This is for someone I work with who does a lot of photo / SAN stuff on the side and a bunch of machines.
To use the n750 as a access point you need to....
give the n750 a unused ip within the fvs338 subnet [192.168.1.253]
Disable the n750 dhcp server
Connect a n750 lan port to a fvs338 lan port
Do not use the n750 internet port