| reply to wayjac
Re: Can't get WRT54GL (Tomato) to work with Netopia 3000! said by wayjac:If you can allow the 3347 to make the pppoe connection you can use the 3347 ip passthrough option this will work just as well as bridge mode
Alright, I ended up setting the router to DHCP and enabling IP-Passthrough on the modem and it worked! I don't think I really gain anything by having the router do PPPoE auth so this should be perfect. Thanks!
The only thing I'm not sure about is whether IP-Passthrough disables NAT for the specified device. I suppose if I run into any problems I can create pinholes (port forwarding) for all ports on the router... |
|
 wayjacPremium,MVM
join:2001-12-22
Indy | said by goodtimeokc:I don't think I really gain anything by having the router do PPPoE auth so this should be perfect I agree with this commentsaid by goodtimeokc:The only thing I'm not sure about is whether IP-Passthrough disables NAT for the specified device Check the tcp/ip info of the ip passthrough device
When ip passthrough is configured correctly the device will have a public ip address, a public gateway ip address, and public dns ip addresses
The dhcp ip address is private and it's needed for lan accesssaid by goodtimeokc:I suppose if I run into any problems I can create pinholes (port forwarding) for all ports on the router... If you have any pinholes set up on the 3347 you should delete them that will force all unsolicited internet traffic/ports to the dlink |
|
| I have basically the same problem with the same exact situation and equipment. I didn't really understand how you bridged them. I Tried doing the things you suggested,but they didn't work. Can anyone help me through here or teamviewer with me. Thanks |
|
