|
USG20: has anybody successfully configured IPv6?Up to now I have not been able to get my USG20 working through IPv6. I do have a native IPv6 connection with my provider. The USG20 is behind a Fritz!Box 7360, setup as ADSL modem/router. PC's that are directly connected to the 7360 are working perfectly with IPv6, so it must either be a problem with the USG20 or the connection between the 7360 and the USG20.
Has anybody been able to get such a (or a similar) setup working? |
JPedroT Premium Member join:2005-02-18 |
JPedroT
Premium Member
2012-May-28 10:43 am
Your USG probably needs more attention than a PC when it comes to configuration.
How many subnets do you have or can make? How does your Fritz deliver out IP on its LAN side,can it do DHCP-PD so that you get WAN and LAN v6 subnets for your USG?
For v6 you do not use NAT, so you need to assign both LAN and WAN IP's from the Fritz device or configure it statically and static routes in the frtiz device. |