reply to tshirt
Re: [Signals] Upstream bonding enabled, but downstream signals l
said by tshirt:Thanks for the info.
Not bad really.
on the downstream side +10 to-10 is acceptable so if it's not bouncing around too much then it's a bit low but should be ok
On the upstream side the 40's are a good ranges so no problem there either.
in the forum FAQ look for "what should my signals be? " (or similar) to read about it more
What about the SNR? How much leeway do I have with that?
VP - WinBeta
above 30-32 on the dn side so 34 is good considering the low signal it would be higher if the signal was louder.
reply to Tibby
here's the FAQ
»Comcast High Speed Internet FAQ »What should my Signal Levels be?