sbrook Mod join:2001-12-14 Ottawa |
to highwire2007
Re: [Cable] Cable: Anyone still NOT have upstream channel bondinFallowfield phub (really big number Richmond Rd FLFRD) is still very much no upstream channel bonding. I'm sure that Craig Henry is Richmond Rd (small number) phub (RCHRD) Most of Nepean inside the greenbelt is fed from Richmond Rd.
Banner's west of Greenbank, so it wouldn't surprise me if they don't use Greenbank as the dividing line between RCHRD and FLFRD. |
|
Nagilum Premium Member join:2012-08-15 Kitchener, ON |
to highwire2007
West Kitchener here and I am still stuck with four channels down and one up. You are not alone. |
|
DSMdude join:2012-06-30 Kitchener, ON |
to highwire2007
Went 8x4 here in Kitchener a few weeks ago |
|
|
to highwire2007
In in London I appear to have 4x1... but I am with the new 476 and it is showing 64 QAM up instead of 16 everyone else is getting. What does that mean for me?
--------
Status Code: Operational Software Version: STAC.02.50 Software Model: a81a Bootloader: 2.3.1
Cable Signal Details
Forward Path: Channel Frequency Power SNR BER Modulation 1 633.0 MHz -3.4 dBmV 42.5 dB 0.000 % 256 QAM 2 591.0 MHz -3.5 dBmV 42.5 dB 0.000 % 256 QAM 3 597.0 MHz -3.1 dBmV 42.5 dB 0.000 % 256 QAM 4 603.0 MHz -3.0 dBmV 43.0 dB 0.000 % 256 QAM 5 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 6 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 7 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 8 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None
Return Path: Channel ID Frequency Power Modulation 1 31.3 MHz 41.5 dBmV 64 QAM 0 0.0 MHz 0.0 dBmV QPSK 0 0.0 MHz 0.0 dBmV QPSK 0 0.0 MHz 0.0 dBmV QPSK |
|
|
to highwire2007
DMC475 and I get 4x1 on Richmond Rd. POI. Live in Westboro Beach about 2 or 3 blocks from the POI itself (in the Rogers Community Access Channel Cable building I believe) in Ottawa and though I am only 4x1 I haven't had issues with speed on 28MB extreme. |
|
|
to highwire2007
Just got 4x4 (previously 4x2) on my SB6120, the max number of channels it can handle, meaning it may be even higher in my area of North Waterloo |
|
|
to highwire2007
They are in the process up enabling upstream channel here in London. |
|
Meljin join:2010-09-12 London, ON |
to highwire2007
Central London here:
Status Code: Operational Software Version: STAC.02.31 Software Model: a81a Bootloader: 2.3.1
Cable Signal Details Forward Path: Channel Frequency Power SNR BER Modulation 1 633.0 MHz 7.4 dBmV 40.4 dB 0.000 % 256 QAM 2 591.0 MHz 5.3 dBmV 39.9 dB 0.000 % 256 QAM 3 597.0 MHz 5.9 dBmV 40.3 dB 0.000 % 256 QAM 4 603.0 MHz 6.2 dBmV 40.2 dB 0.000 % 256 QAM 5 609.0 MHz 6.7 dBmV 40.6 dB 0.000 % 256 QAM 6 615.0 MHz 6.8 dBmV 40.2 dB 0.000 % 256 QAM 7 621.0 MHz 6.9 dBmV 40.3 dB 0.000 % 256 QAM 8 639.0 MHz 7.2 dBmV 40.3 dB 0.000 % 256 QAM Return Path: Channel ID Frequency Power Modulation 1 31.3 MHz 42.8 dBmV 16 QAM 2 25.3 MHz 42.8 dBmV 16 QAM 5 22.1 MHz 41.3 dBmV 16 QAM 6 38.6 MHz 42.8 dBmV 16 QAM
Seems like 2 added up channels just came into effect for me. Now, if the disconnecting issue would go away I would happy as anything. |
|
|
JenSuisUn Premium Member join:2006-02-23 Chatham, ON |
said by Meljin:Software Version: STAC.02.31
Please post in the » /forum ··· avdirect forum! |
|
|
to Nagilum
South West Kitchener and I have 4 channels up |
|
Meljin join:2010-09-12 London, ON |
to JenSuisUn
Already done and someone at TSI has actioned this. |
|
EssGee join:2002-01-06 Toronto, ON 2 edits |
to highwire2007
Ajax/Pickering - still 4x1 here. |
|
alec9 join:2007-12-24 Ottawa, ON 1 edit |
to highwire2007
Ottawa /Westboro Area Still 4x1 - Richmond 409 POI (1.2km away)
Status Code: Operational Software Version: STAC.02.50 Software Model: a81a Bootloader: 2.3.1
Cable Signal Details Forward Path: Channel Frequency Power SNR BER Modulation 1 621.0 MHz 2.0 dBmV 42.0 dB 0.000 % 256 QAM 2 591.0 MHz 1.3 dBmV 41.0 dB 0.000 % 256 QAM 3 597.0 MHz 1.5 dBmV 41.4 dB 0.000 % 256 QAM 4 603.0 MHz 1.3 dBmV 41.4 dB 0.000 % 256 QAM 5 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 6 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 7 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None 8 0.0 MHz 0.0 dBmV 0.0 dB 0.0 % None Return Path: Channel ID Frequency Power Modulation 1 31.3 MHz 47.0 dBmV 16 QAM 0 0.0 MHz 0.0 dBmV QPSK 0 0.0 MHz 0.0 dBmV QPSK 0 0.0 MHz 0.0 dBmV QPSK |
|
|
to highwire2007
4x2 here.
Near Algonquin College in Nepean on Richmond Rd POI. Using Motorola SB6120 |
|
|
4 x 4 with SB6120, Ottawa St. Laurent. It went four up about a month ago and I was off line for 14 hrs |
|
dcorban join:2003-07-13 Newmarket, ON |
to highwire2007
It looks like I am 8x4 here in Newmarket. |
|
moffa join:2007-10-14 North York, ON |
to EssGee
Just got 4x4 in Ajax. Still on 1 Mbps though Software: SB_KOMODO-1.0.6.1-SCM00-NOSH 16QAM |
|
|
dsfrg4
Anon
2012-Sep-1 12:52 am
st laurent in ottawa... i was 4*1(or 4*2) i reset the modem and now it's 4*4 6121 modem |
|
sbrook Mod join:2001-12-14 Ottawa |
to highwire2007
fallowfield still 4*1 |
|
JC_ Premium Member join:2010-10-19 Nepean, ON |
JC_
Premium Member
2012-Sep-1 1:14 pm
When I had Rogers for about in July I had a Cisco DPC3825 and I had 8*2 bonding on the Fallowfield POI in Craig Henry. |
|
|
to highwire2007
8*2 in Old Barrhaven for the last few weeks here. |
|
gynnie join:2010-02-02 London, ON |
gynnie
Member
2012-Sep-1 7:16 pm
Just had a new connection set up in East London.
Status Code: Operational Software Version: STAC.02.50 Software Model: a81a Bootloader: 2.3.1
Cable Signal Details
Forward Path: Channel Frequency Power SNR BER Modulation 1 639.0 MHz 1.6 dBmV 41.8 dB 0.000 % 256 QAM 2 591.0 MHz 0.3 dBmV 41.3 dB 0.000 % 256 QAM 3 597.0 MHz 0.6 dBmV 41.4 dB 0.000 % 256 QAM 4 603.0 MHz 1.0 dBmV 41.4 dB 0.000 % 256 QAM 5 609.0 MHz 1.0 dBmV 41.7 dB 0.000 % 256 QAM 6 615.0 MHz 1.4 dBmV 41.9 dB 0.000 % 256 QAM 7 621.0 MHz 1.7 dBmV 41.9 dB 0.000 % 256 QAM 8 633.0 MHz 2.1 dBmV 41.9 dB 0.000 % 256 QAM
Return Path: Channel ID Frequency Power Modulation 4 38.6 MHz 46.5 dBmV 64 QAM 1 31.3 MHz 46.5 dBmV 64 QAM 2 25.3 MHz 45.0 dBmV 64 QAM 3 22.1 MHz 45.0 dBmV 64 QAM
Not sure on what to make of the stats since I'm fairly new to Cable...so long Bell! |
|
|
Perma
Member
2012-Sep-1 8:26 pm
4x1, I'm in West London and still waiting for some upstream bonding. |
|
|
to highwire2007
4x1 on my street Winding Way in Kitchener. I still get 1Mbit upstream even at peak hours so I don't really mind. |
|
|
to highwire2007
I noticed the power levels of the bottom three upstream channels have changed. In westmount in London, maybe something is going on?
|
|
|
to highwire2007
Got 4x2 up here in Brampton, got 64QAM too. |
|
alec9 join:2007-12-24 Ottawa, ON |
to highwire2007
upgrade last night from Richmond/Ottawa POI . 8/4
Status Code: Operational Software Version: STAC.02.50 Software Model: a81a Bootloader: 2.3.1
Cable Signal Details Forward Path: Channel Frequency Power SNR BER Modulation 1 639.0 MHz 2.1 dBmV 41.9 dB 0.000 % 256 QAM 2 615.0 MHz 1.3 dBmV 41.2 dB 0.000 % 256 QAM 3 621.0 MHz 1.6 dBmV 41.3 dB 0.000 % 256 QAM 4 633.0 MHz 2.1 dBmV 41.9 dB 0.000 % 256 QAM 5 645.0 MHz 2.2 dBmV 41.7 dB 0.000 % 256 QAM 6 651.0 MHz 2.2 dBmV 41.8 dB 0.000 % 256 QAM 7 657.0 MHz 2.0 dBmV 41.8 dB 0.000 % 256 QAM 8 663.0 MHz 2.0 dBmV 41.7 dB 0.000 % 256 QAM Return Path: Channel ID Frequency Power Modulation 1 31.3 MHz 45.5 dBmV 16 QAM 2 25.3 MHz 45.5 dBmV 16 QAM 3 22.1 MHz 45.5 dBmV 16 QAM 4 38.6 MHz 47.0 dBmV 16 QAM |
|
|
to gscott521
They have been doing "maintenance" in the Westmount area for awhile now. I think they are going on three weeks now. I'm right near commissioners and wonderland. |
|
|
to highwire2007
Looks like Fallowfield POI flipped last night |
|
mlord join:2006-11-05 Kanata, ON |
mlord
Member
2012-Sep-17 9:46 am
Some of it anyway. Not here yet. |
|