NetDog Premium Member join:2002-03-04 Hollywood, FL 4 edits
1 recommendation |
NetDog
Premium Member
2012-May-29 11:16 am
[IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEPD)Mod Note: Keep your posts strictly on topic, following the format requested. Off topic and incorrectly formatted posts will be removed. ~sorto'New info March 20, 2013: » [IPv6] IPv6 Routers Tested with User Guides... If you post your data here, it would be nice if you add your location to the map HunterZ created for us here ---> »[IPv6] Map of CC IPv6 CPE Dual Stack (CPE and CPEP) Progress Thanks to NetDog for ---> »[IPv6] Troubleshooting Comcast IPv6 (Start Here)
Post Here. 1) Post your City, State 2) Your router or if your direct connected to the cable modem your host OS if you dont mind 3) Post a screen shot of » test-ipv6.comcast.net/ or a screen shot of your router with your IPv6 address, removing the host identifier from the IP address; Please keep the /32 in the IPv6 address for the identifier so we can confirm you have a Comcast IPv6 address (Mod Note: This apparently applies only if you are posting the router screen shot). So what we are looking for is the host address ( 2001:558:6X) or the Prefix-delegation ( 2601:X) Here is the same post on the company Comcast Forum: »forums.comcast.com/t5/Ho ··· /1295481
See these updates ---> »[IPv6] Native IPv6 enabled for residential broadband in Oregon »[IPv6] IPv6 deployment in Oregon and SW\Washington on Cisco 10k »Residential Native Dual Stack Launched across WA
See this one, too. ---> »[IPv6] IPv6 rollout status?
|
|
NetDog |
NetDog
Premium Member
2012-May-29 11:17 am
Re: [IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEPEnglewood, CO Directly connected to the Cable modem with Windows 7 OS |
|
whfsdude Premium Member join:2003-04-05 Washington, DC |
to NetDog
Washington, DC Router: pfSense 2.1-DEVELOPMENT Screenshot: of PD address on host. |
|
your moderator at work
hidden : hidden : hidden :
|
SunnyRuns from Clowns
join:2001-08-19 |
to NetDog
(topic move) [IPv6] How do I configure for IPv6?Moderator ActionThe post that was here, has been moved to a new topic .. » [IPv6] How do I configure for IPv6? |
actions · 2012-May-29 4:54 pm · (locked) |
your moderator at work
hidden :
|
LordStig join:2011-06-15 San Francisco, CA 1 edit |
Re: [IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEP1) Fremont, CA 2) Connected via Router (Netgear WNDR4500) with DHCP mode selected in the IPv6 settings. |
|
your moderator at work
hidden :
|
jlivingood Premium Member join:2007-10-28 Philadelphia, PA
1 recommendation |
to NetDog
Re: [IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEP1 - Philadelphia, PA 2 - Apple Airport Extreme |
|
mike5026 Premium Member join:2007-09-30 Rockford, IL 2 edits
1 recommendation |
to NetDog
Rockford, IL Router - Apple Airport Extreme Base Station Motorola SB6121 Windows 7 |
|
jjmb join:2009-12-01 USA
1 recommendation |
jjmb
Member
2012-May-29 11:30 pm
1 - Skippack, PA 2 - Airport Extreme 3 - OSX |
|
1 recommendation |
to NetDog
Beachwood, New Jersey Cisco Linksys EA4500 Motorola SB6120/SB6121 |
|
ARRIS S33
1 edit |
to NetDog
Livermore, California
Your IPv4 address on the public Internet appears to be 24.
Your IPv6 address on the public Internet appears to be 2001:558::72c9
The World IPv6 Launch day is June 6th, 2012. Good news! Your current browser, on this computer and at this location, are expected to keep working after the Launch. [more info]
Congratulations! You appear to have both IPv4 and IPv6 Internet working. If a publisher publishes to IPv6, your browser will connect using IPv6. Your browser prefers IPv6 over IPv4 when given the choice (this is the expected outcome).
Your DNS server (possibly run by your ISP) appears to have IPv6 Internet access. Your readiness scores 10/10 for your IPv4 stability and readiness, when publishers offer both IPv4 and IPv6 10/10 for your IPv6 stability and readiness, when publishers are forced to go IPv6 only
Click to see test data |
|
1 recommendation |
to NetDog
Bloomington, IN OpenWrt trunk (needed firewall changes for the link-local default route) |
|
1 recommendation |
Who ever had the idea of creating this little thing deserves a handshake |
actions · 2012-May-30 12:41 am · (locked) |
your moderator at work
hidden :
|
Tobin join:2003-09-21 Burlingame, CA 1 edit |
to NetDog
Re: [IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEP1) Hillsborough, CA 2) Airport Extreme (IPv6 mode - Router) 3) » dl.dropbox.com/u/2264916 ··· bled.png
|
|
SunnyRuns from Clowns
join:2001-08-19 |
Sunny
2012-May-30 1:14 pm
(topic move) IPv6 routing through comcasts' backbone showing upModerator ActionThe post that was here, has been moved to a new topic .. » IPv6 routing through comcasts' backbone showing up for me nowReason: Off topic for this thread. See instruction in the first post. |
actions · 2012-May-30 1:14 pm · (locked) |
devicenull Premium Member join:2002-12-01 Piscataway, NJ |
to NetDog
Re: [IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEP1) Clark, NJ 2) PFSense 2.1-BETA0 For anyone else trying this with pfsense, make sure you're running -BETA0, a version from a couple days ago did not work for me. |
|
|
to NetDog
1. Detroit, MI 2. Linksys E4200 |
|
|
HESage1 to NetDog
Anon
2012-May-30 9:24 pm
to NetDog
1) Mountain View, CA 2) D-Link DIR-825, linux laptop
|
|
|
to NetDog
1) Sunnyvale, CA 2) Linksys E4200v2 |
|
1 edit
1 recommendation |
to NetDog
PC -> SB6120 | PC -> WNR3500L -> SB6120 | Screenshot From WNR3500L Configuration |
York, PA |
|
RR ConductorRidin' the rails Premium Member join:2002-04-02 Redwood Valley, CA ARRIS SB6183 Netgear R7000
|
to NetDog
We've got it here in the Ukiah and Redwood Valley areas (Ukiah CMTS) in Mendocino County in NW CA, it is confirmed by NetDog, however, I am in the process of getting it to work correctly on my Asus RT-N66U router, which he is working with me on as well. So-
Ukiah, CA Redwood Valley CA
Both are on the Ukiah CMTS. |
|
your moderator at work
hidden :
|
2 recommendations |
to NetDog
Re: [IPv6] Evidence of Comcast IPv6 CPE Dual Stack (CPE and CPEP1. Dixon, IL 2. Cisco 2621XM, IOS 12.4(25d), connected to a Motorola SB6120 Relevant IOS config: ipv6 dhcp pool DHCP-LAN-IPv6 !dns-server 2001:558:FEED::1 !Had to switch to Google's DNS, Comcast was giving "Query refused" !dns-server 2001:558:FEED::2 !Had to switch to Google's DNS, Comcast was giving "Query refused" dns-server 2001:4860:4860::8888 dns-server 2001:4860:4860::8844 ! interface FastEthernet0/0 description 100Mb Connected to Cable Modem ipv6 address autoconfig default ipv6 enable ipv6 dhcp client pd comcast-ipv6 ! interface FastEthernet0/1 description 100Mb Internal LAN ipv6 address comcast-ipv6 ::/64 eui-64 ipv6 nd other-config-flag ipv6 dhcp server DHCP-LAN-IPv6 !
|
|
|
Daemon Premium Member join:2003-06-29 Washington, DC
1 recommendation |
to NetDog
1)SF,CA 2) Airport Extreme 2nd gen in host mode wirelessly extending Airport Extreme 5th gen in router mode. |
|
1 recommendation |
to NetDog
1) Stockton, Ca 2) Linksys E4200v1 |
|