dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
16
share rss forum feed

JohnPaul

join:2011-04-18
North York, ON
reply to elitefx

Re: [Express] Cisco DPC3008 does work on Rogers!

Steps to get DPC3008 activated on Rogers:
1) buy the modem, but don't open it. In case things don't work out you'll be able to return it without a re-stocking fee.
2) find the SN and MAC address on the outside of the box
3) call Rogers Retail Fulfillment at 1-877-236-7208
4) tell them the modem name, SN, MAC address. It's ok to tell them you bought it at a computer store.
5) Rogers will try to activate it and they'll tell it you it won't work.
6) Tell them to enter the MAC address in both the SN field and the MAC address field in their system.
7) the modem should now register and Rogers will tell you it's all done.
8) open the box, hook up your modem and give it a few mintues to connect to the network.

I found the above instructions buried in some other message somewhere on the internet. I did not figure this out on my own and neither did the Rogers guy.

Important note: If you're on a grandfathered plan all the above still won't get you the higher bandwidth!

Paul.


elitefx

join:2011-02-14
London, ON
kudos:2

2 edits
Called fullfillment. What model number did you use to get activated? Very important piece of the puzzle missing, other than that looking good. Sidenote: What hours are the fulfillment reps there (just curious)? Thanks

Hooter

join:2009-08-17
Scarborough, ON
reply to JohnPaul
said by JohnPaul:

Important note: If you're on a grandfathered plan all the above still won't get you the higher bandwidth!

That is actually a very important note. One of the main reasons for doing this would be to get the higher bandwidth and the higher speeds. Do you at least get the higher speeds?

JohnPaul

join:2011-04-18
North York, ON
reply to elitefx
said by elitefx:

Called fullfillment. What model number did you use to get activated? Very important piece of the puzzle missing, other than that looking good. Sidenote: What hours are the fulfillment reps there (just curious)? Thanks

I just told them Cisco Linksys DPC3008. I then explained that it's a similar modem to the DPC3825 but without wireless router.
Their hours are Mon-Sat 8am-midnight, Sun 9am-9pm

JohnPaul

join:2011-04-18
North York, ON
reply to Hooter
said by Hooter:

said by JohnPaul:

Important note: If you're on a grandfathered plan all the above still won't get you the higher bandwidth!

That is actually a very important note. One of the main reasons for doing this would be to get the higher bandwidth and the higher speeds. Do you at least get the higher speeds?

I was on a grandfathered Express account, and after several minutes of pushing I finally got to speak to a manager who completely agreed with my request (ie I now have a D3 modem and I should get the 80 GB/mo transfer), so the only thing he could do was to bump me to an Extreme account at no extra charge (but for one year only) while maintain my grandfathered cable/TV bundle. So, I now have 95 GB/month... but I'm confused about the speed as I'm still getting 18 Mpbs down, but I'm getting about 800 Kpbs up. These three figures don't add up to an Extreme account. Nevertheless, I am getting what I orginally wanted (at least 80 GB/month transfer), so I'm happy.


elitefx

join:2011-02-14
London, ON
kudos:2
reply to JohnPaul
And you are a Great man. Thankyouuuu......


yyzlhr

@rogers.com
reply to JohnPaul
said by JohnPaul:

said by Hooter:

said by JohnPaul:

Important note: If you're on a grandfathered plan all the above still won't get you the higher bandwidth!

That is actually a very important note. One of the main reasons for doing this would be to get the higher bandwidth and the higher speeds. Do you at least get the higher speeds?

I was on a grandfathered Express account, and after several minutes of pushing I finally got to speak to a manager who completely agreed with my request (ie I now have a D3 modem and I should get the 80 GB/mo transfer), so the only thing he could do was to bump me to an Extreme account at no extra charge (but for one year only) while maintain my grandfathered cable/TV bundle. So, I now have 95 GB/month... but I'm confused about the speed as I'm still getting 18 Mpbs down, but I'm getting about 800 Kpbs up. These three figures don't add up to an Extreme account. Nevertheless, I am getting what I orginally wanted (at least 80 GB/month transfer), so I'm happy.

They put you on the grandfathered extreme which works with D2 modems. They probably provisioned your modem as a D2 modem hence why they couldn't give you Express with 80gb.

Hooter

join:2009-08-17
Scarborough, ON
said by yyzlhr :

They put you on the grandfathered extreme which works with D2 modems. They probably provisioned your modem as a D2 modem hence why they couldn't give you Express with 80gb.

That is what it looks like to me as well. I know JohnPaul is happy now that he has a higher speed and bandwidth allowance, but what is the point of paying for a new stand alone D3 modem and going through the hoops with Rogers to get it provisioned, only to have it set up as a D2 modem with a grandfathered plan? Something does not sound right here!

aereolis

join:2003-06-12
Brampton, ON
reply to JohnPaul
said by JohnPaul:

Steps to get DPC3008 activated on Rogers:
1) buy the modem, but don't open it. In case things don't work out you'll be able to return it without a re-stocking fee.
2) find the SN and MAC address on the outside of the box
3) call Rogers Retail Fulfillment at 1-877-236-7208
4) tell them the modem name, SN, MAC address. It's ok to tell them you bought it at a computer store.
5) Rogers will try to activate it and they'll tell it you it won't work.
6) Tell them to enter the MAC address in both the SN field and the MAC address field in their system.
7) the modem should now register and Rogers will tell you it's all done.
8) open the box, hook up your modem and give it a few mintues to connect to the network.

I found the above instructions buried in some other message somewhere on the internet. I did not figure this out on my own and neither did the Rogers guy.

Important note: If you're on a grandfathered plan all the above still won't get you the higher bandwidth!

Paul.

This is what you need to do from your end. From the office side end, there is one crucial step. You need them to add your modem to the system as a different modem. If you were to call the office, and find out what model you have, it wouldn't say cisco dpc3008, they would tell you some other model number, like the cisco 3825. Because the 3008 isn't authorized for use with rogers (at least not yet afaik).
--
Hello

JohnPaul

join:2011-04-18
North York, ON
reply to Hooter

That is what it looks like to me as well. I know JohnPaul is happy now that he has a higher speed and bandwidth allowance, but what is the point of paying for a new stand alone D3 modem and going through the hoops with Rogers to get it provisioned, only to have it set up as a D2 modem with a grandfathered plan? Something does not sound right here!

You're right...big headache and I'm not sure I'm much futher ahead. The Rogers guy was very sneaky: to satisfy my request for a higher monthly transfer cap, he moved me from Express to Extreme at no extra charge for one year. I was a happy customer. I later found out that he locked me into a one year agreement, without my consent!! I am about to call back Rogers and have that reversed.

JohnPaul

join:2011-04-18
North York, ON
reply to aereolis
said by aereolis:

This is what you need to do from your end. From the office side end, there is one crucial step. You need them to add your modem to the system as a different modem. If you were to call the office, and find out what model you have, it wouldn't say cisco dpc3008, they would tell you some other model number, like the cisco 3825. Because the 3008 isn't authorized for use with rogers (at least not yet afaik).

In a follow up call I asked Rogers what modem they see on my account and they said "customer owned DOCSIS WDZP". Just in case this means anything to anyone.


yyzlhr

@rogers.com
it basically means what we were suspecting all along. They've provisioned your modem as a D2 modem, hence why they were not able to put you on the Express tier with 80GB of usage.

JohnPaul

join:2011-04-18
North York, ON
reply to JohnPaul
said by JohnPaul:

That is what it looks like to me as well. I know JohnPaul is happy now that he has a higher speed and bandwidth allowance, but what is the point of paying for a new stand alone D3 modem and going through the hoops with Rogers to get it provisioned, only to have it set up as a D2 modem with a grandfathered plan? Something does not sound right here!

You're right...big headache and I'm not sure I'm much futher ahead. The Rogers guy was very sneaky: to satisfy my request for a higher monthly transfer cap, he moved me from Express to Extreme at no extra charge for one year. I was a happy customer. I later found out that he locked me into a one year agreement, without my consent!! I am about to call back Rogers and have that reversed.

I got Rogers to reverse the one year agreement, but it took about 50 minutes on the phone. They said they will waive the $250 early cancellation fee. Except now I'm back where I started, which is the Express grandfathered plan, with 60 GB/mo transfer, even though I have a D3 modem. This has been a tremendous waste of time and I am quite displeased with Rogers.

Hooter

join:2009-08-17
Scarborough, ON
I really sympathise with you JohnPaul. You went to a lot of trouble and with Rogers, it was all for nought. This is what Rogers has become. It is all about them having control and why be concerned about the customer, because after all, we have no competition so we can do whatever we want to and the customer be damned! They want customers to buy or rent their crappy modems but I for one will be looking at the alternatives in the fall when my contract is up.

aereolis

join:2003-06-12
Brampton, ON
reply to yyzlhr
said by yyzlhr :

it basically means what we were suspecting all along. They've provisioned your modem as a D2 modem, hence why they were not able to put you on the Express tier with 80GB of usage.

WDZP means - customer purchased third party modem - not a docsis 3.0 modem, not a modem purchased from rogers, but 2.0 you bought ... like for instance a SB5101. »www.google.ca/search?q=sb5101&hl···bih=1263
--
Hello


LondonDave
Premium
join:2011-09-05
London, ON
So in theory couldn't he just call in and have that modem provisioned as a 3rd party SMC docsis 3 gateway like so many others?

With some fighting of course

JohnPaul

join:2011-04-18
North York, ON
I went to a Rogers store yesterday and it was confirmed that my DPC3008 was set up as a docsis 2 modem! Just like metioned above. I suggested it should be set up as a DPC3825 modem and he said it already was! Since this made no sense, he opened a trouble ticket and now I'm waiting for a call back in the next 7 days, hopefully with a solution.