dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
4
share rss forum feed

Melissa2009B

join:2009-12-27
Denver, CO
reply to Chris 313

Re: [Speed] May have to switch to Comcast

Another little issue here, since the switch from CenturyLink DSL to Comcast HSI. Wireless was used for both.

So I got this little PTZ night vision IP camera for around $75 on Ebay a couple of years ago. It wasn't easy to setup if I recall ( made in Taiwan, possibly in a back alley, with no support. It's kinda staticky on the sound quality. ), but was working with the Qwest PK5000 wireless router. The software remains installed on my PC.

So we switched to the Comcast wireless gateway about 5 weeks ago and it no longer works now.

I'm halfway wanting to fix it, and have half a mind to just find something of better quality, if possible, for the same money, and ditch this one.

Melissa2009B

join:2009-12-27
Denver, CO
Well the refurbed Netgear router mentioned above, came from Amazon today. Now that GBTV has been fixed, I'm hoping it's not just a futile exercise to use this thing, right?

Hopefully it will STILL speed things up some, over the TG862 gateway?

I'll need to wait for the weekend to try this, so as not to risk losing business emails or anything.


tshirt
Premium,MVM
join:2004-07-11
Snohomish, WA
kudos:5
Reviews:
·Comcast
You have a day or 2, take the time to chart out which port you want each thing attached to, which (if any) devices are staticly assigned, and so on. then take your time move one wire at a time and being sure that works before the next.
If carefully thought through the change over should be less than an hour--- and in worse case you can back up to where you are now, and try again later.

Melissa2009B

join:2009-12-27
Denver, CO
said by tshirt:

You have a day or 2, take the time to chart out which port you want each thing attached to, which (if any) devices are staticly assigned, and so on. then take your time move one wire at a time and being sure that works before the next.
If carefully thought through the change over should be less than an hour--- and in worse case you can back up to where you are now, and try again later.

I'm totally clueless at this point, will have to look up what you mean.

But IS there any point in messing with this, now that things are working? Will it really speed things up, make them run any more smoothly, or give us any advantage at all?

The old saying comes to mind: If it works, don't fix it.


NetFixer
Freedom is NOT Free
Premium
join:2004-06-24
The Boro
Reviews:
·Cingular Wireless
·Comcast Business..
·Vonage
said by Melissa2009B:

But IS there any point in messing with this, now that things are working? Will it really speed things up, make them run any more smoothly, or give us any advantage at all?

The old saying comes to mind: If it works, don't fix it.

Sounds to me as if you are giving yourself some good advice.
--
History does not long entrust the care of freedom to the weak or the timid.
-- Dwight D. Eisenhower

Melissa2009B

join:2009-12-27
Denver, CO
reply to Melissa2009B
said by Melissa2009B:

Another little issue here, since the switch from CenturyLink DSL to Comcast HSI. Wireless was used for both.

So I got this little PTZ night vision IP camera for around $75 on Ebay a couple of years ago. It wasn't easy to setup if I recall ( made in Taiwan, possibly in a back alley, with no support. It's kinda staticky on the sound quality. ), but was working with the Qwest PK5000 wireless router. The software remains installed on my PC.

So we switched to the Comcast wireless gateway about 5 weeks ago and it no longer works now.

I'm halfway wanting to fix it, and have half a mind to just find something of better quality, if possible, for the same money, and ditch this one.

On this one, is there a better topic forum here, where I can ask about this?

I just realized that this camera may not need to go into our Comcast router, it may be able to be seen by the Medialink wireless USB unit on my PC.

Melissa2009B

join:2009-12-27
Denver, CO

1 edit
Well I have the separate router and downloaded manuals for that and the TG862G from Comcast, but I haven't the foggiest idea how to configure these in that "bridge" mode now. What to hook to what? Is it simple or rocket science?
...

Ok, some more investigating here...

Looks like I plug the ethernet ports together, get Comcast to switch to bridge mode, then reconfigure the PC's and Rokus into the router?