dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
3
share rss forum feed

manolito2112

join:2006-02-18
canada
reply to InvalidError

Re: [Cable] How can I get my SBG6580 Activated with teksavvy?

said by InvalidError:

said by manolito2112:

if you don't know that, DHCP do not send any model or serial number information from any device

Before you can even send a DHCP request out, the modem has to go through the authentication/authorization procedure (BPI+) with the CMTS and this procedure DOES include modem MAC (HMAC), modem certificate, manufacturer, model number, serial number, etc.

All what they need is serial number + HMAC (both previously provided), BPI+ Indeed include Manufacturer ID in the VENDOR ID portion of the CM-ID frame (3 Bytes),but guess what, is 00:20:40 for ALL MOTOROLA's Cable Modems, useless!, Certificate? is generated after as a proof of identity and encryption

the cerberus

join:2007-10-16
Richmond Hill, ON

said by manolito2112:

said by InvalidError:

said by manolito2112:

if you don't know that, DHCP do not send any model or serial number information from any device

Before you can even send a DHCP request out, the modem has to go through the authentication/authorization procedure (BPI+) with the CMTS and this procedure DOES include modem MAC (HMAC), modem certificate, manufacturer, model number, serial number, etc.

All what they need is serial number + HMAC (both previously provided), BPI+ Indeed include Manufacturer ID in the VENDOR ID portion of the CM-ID frame (3 Bytes),but guess what, is 00:20:40 for ALL MOTOROLA's Cable Modems, useless!, Certificate? is generated after as a proof of identity and encryption

And SMC D3 gateway isnt motorola. therefore BPI+ on rogers is not looking at Manufacturer ID in the VENDOR ID.