DZS
join:2007-09-09
York, PA
1 edit |
DZS
Member
2012-Jul-19 7:35 pm
SB6120 Firmware Updated (7/19/12)After a brief outage, I checked my 6120's config page. There is a new tab called "Open Source" that just lists all of the open source libraries that the modem is using. The firmware got updated to the following: SB_KOMODO-1.0.6.6-SCM00-NOSH Also I noticed this under configuration: DOCSIS MIMO IPv4 Only Modem's IP Mode IPv6 Only Anyone else get this update yet? If so, notice any other changes? |
|
 ctgreybeardOld dogs can learn new tricks
Premium Member
join:2001-11-13
Bethel, CT |
Re: SB6120 Firmware UpdatedI've seen a couple of reports here at DSLR that this version is rolling out but I haven't seen it myself (Danbury, CT) yet. I'm hoping it's going to lead to native IPV6 but I have no evidence to support that hope.  |
|
DZS
join:2007-09-09
York, PA
1 recommendation |
DZS
Member
2012-Jul-19 7:44 pm
Maybe they are slowly rolling out to select areas. I am not sure of the pattern though. My friend in the next township over does not have this version yet.
It looks like a really good step to IPv6. Maybe this is that final "push". |
|
| |
I rebooted mine today and got it. Was wondering why my Send/Receive light were blinking after a reboot then it rebooted on it's own. |
|
 tshirt
Premium Member
join:2004-07-11
Snohomish, WA
1 recommendation |
tshirt to DZS
Premium Member
2012-Jul-19 7:57 pm
to DZS
Re: SB6120 Firmware Updated (7/19/12) |
|
| |
to DZS
Re: SB6120 Firmware UpdatedI was running IPv6 back in the beginning of June before the firmware rollout so I dunno if the two are related. |
|
| |
to DZS
Re: SB6120 Firmware Updated (7/19/12)Nothing north of you in the Harrisburg area yet.... |
|
DZS
join:2007-09-09
York, PA |
DZS
Member
2012-Jul-19 9:31 pm
It makes me wonder how the choose their locations to roll it out.
You are literally what, 20 miles north of me? |
|
| |
Nothing here in ca as of yet. Kind of a bummer |
|
| |
to DZS
Just rebooted got the new Firmware. Just outside Wilkes-Barre ,PA |
|
| |
to DZS
Since the firmware upgrade I actually noticed a 2db drop in my downstream signal. Went from +7 to +5. Has to be a coincidence right ? |
|
DZS
join:2007-09-09
York, PA |
DZS
Member
2012-Jul-20 9:54 pm
My upstream dropped (down to 29db), and downstream raised, lol.
Maybe just some tuning? |
|
| |
to DZS
I had to reboot my SB6121 modem today, but it still shows the same old "SB612X-1.0.3.3-SCM00-NOSH" version here (Monmouth County, NJ) though.  I thought there was a good chance I would get the new firmware, as Mike Wolf, who is just south of me in the Toms River/Ocean County, NJ system, has said his modem got it. |
|
 RR ConductorRidin' the rails
Premium Member
join:2002-04-02
Redwood Valley, CA
Netgear R7000
|
to redbeard916
said by redbeard916:Nothing here in CA as of yet. Kind of a bummer.
Well, at least in Folsom, has anybody in CA received it? |
|
| |
I doubt it ca is always last |
|
 SuperNetGo Ninja,Go Ninja Go..
Premium Member
join:2002-10-08
Hoffman Estates, IL |
to DZS
Anyone from Chicago burbs get it? |
|
| |
to telcodad
I'm sure you'll get it. I'm suprised you haven't already  |
|
| |
to DZS
Still nothing here. |
|
boehmb
join:2003-04-21
Glenview, IL |
to DZS
Nothing here yet in Glenview, IL |
|
DZS
join:2007-09-09
York, PA |
to catnapped
Hmm, thats really strange it's not up in Elizabethtown yet.... |
|
 Gmoney
Premium Member
join:2006-05-18
Denver, CO |
Gmoney to DZS
Premium Member
2012-Jul-22 3:24 pm
to DZS
Nothing here in Denver yet |
|
| |
Is the update anything to do with ipv6 deployment? |
|
tshirt
Premium Member
join:2004-07-11
Snohomish, WA
1 recommendation |
tshirt
Premium Member
2012-Jul-22 3:36 pm
said by redbeard916:Is the update anything to do with ipv6 deployment?
No, at least not it's main purpose (it does show a couple more IPv6 settings, as always controlled by the cofig file, nothing for the end user. Just a more general update that shows the credits for open source components, and maybe fixes a few things( they've had almost 2 years) |
|
DZS
join:2007-09-09
York, PA |
DZS
Member
2012-Jul-22 10:33 pm
Yea, I was going to say, it has been quite a long time since I had my last firmware update. ~2 years |
|
1 recommendation |
Still glad it was done if for no other reason then it giving me a warm fuzzy feeling.  |
|
| |
to DZS
Still nuthin  |
|
| |
Got it here in Jensen Beach, FL. SB_KOMODO-1.0.6.6 |
|
| |
to DZS
Just rebooted and got it. Burien, WA
Also anyone have a changelog for the new firmware? |
|
| |
said by Navitron:Also anyone have a changelog for the new firmware?
Motorola doesn't release the changelogs to the public, unfortunately. |
|
| |
to DZS
Got the updated firmware here in Mpls/St. Paul this morning
SB_KOMODO-1.0.6.6-SCM00-NOSH
Boot Version: PSPU-Boot 1.0.0.4m1
Firmware Build Time: Apr 17 2012 15:09:37 |
|
|
