dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
23
share rss forum feed


Krisnatharok
Caveat Emptor
Premium
join:2009-02-11
Earth Orbit
kudos:12
reply to DarkLogix

Re: [BF3] EVGA card freezing? possible fix

said by DarkLogix:

So Kris did reverting the driver help?

Yes it did, at least in BF3. I rolled back to the 296.xx drivers and can play BF3 without freezing at stock voltage (1.025v).

I haven't tried DE:HR yet, but will report back and let you know if it plays nice under DX11.

Right now it sounds like 301.42 doesn't play nice with my card.
--
If we lose this freedom of ours, history will record with the greatest astonishment, those who had the most to lose, did the least to prevent its happening.


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
I wonder I mean its not like EVGA changes the GPU.
and I had the problems even if I went back to stock (or as shipped) setting and my GPU fan is set as fast as it can be (so heat shouldn't be an issue)

to add to heat not being an issue, the ambiant room temp was 64f, the case has positive pressure (from 3x 120's on the front blowing in) and I've looked and no dust.


Krisnatharok
Caveat Emptor
Premium
join:2009-02-11
Earth Orbit
kudos:12
I know it's not heat because I can load the GPU under Furmark without a problem and have the usage and temps skyrocket past what any game uses.


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
Ya so I think nvidia is at fault not the card makers.

I wonder if they somehow enabled a feature that the GPU has locked out?


BonezX
Basement Dweller
Premium
join:2004-04-13
Canada
kudos:1
it was something funky with the driver in general, it would report 3d clock-rates, but would be running 2d, and not switching properly back and forth, mine would go to 2d clock rates and get stuck there no matter what i was doing.


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
reply to Krisnatharok
I think tonight I'll upgrade from 280 to 296 and see if WoW5 is happier.


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
WOW5 DX11 is happier now with the firmware update from »www.evga.com/forums/tm.aspx?&m=1···&mpage=1


Krisnatharok
Caveat Emptor
Premium
join:2009-02-11
Earth Orbit
kudos:12
said by DarkLogix:

WOW5 DX11 is happier now with the firmware update from »www.evga.com/forums/tm.aspx?&m=1···&mpage=1

I just did the same FW update. Running 306 beta drivers without issue.
--
If we lose this freedom of ours, history will record with the greatest astonishment, those who had the most to lose, did the least to prevent its happening.


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
Well my WOW5 DX11 issue is gone but on going to diver 296 the WEI crash is there.

tonight I'll revert the driver to the one just before 296 and see how it does.


Krisnatharok
Caveat Emptor
Premium
join:2009-02-11
Earth Orbit
kudos:12
Did you try the 306 drivers (beta)?

I'm not sure what a diver 296 WEI crash is...


DarkLogix
Texan and Proud
Premium
join:2008-10-23
Baytown, TX
kudos:3
296 the driver version from nvidia.

I'm weary to try a beta driver.

The 296 driver crashed on me just like the 301 did, when running the windows experience index.

But other than WEI the firmware update fixed actuall use crashes. (ie I can enable WOW's DX11 and it didn't crash even after hours, so its good)