dslreports logo
    All Forums Hot Topics Gallery


how-to block ads

Search Topic:
share rss forum feed


Verdun, QC

1 edit
reply to xtlee

Re: Fibe 25 upload speed decreased after install

I wasn't using the tool properly.


Markham, ON
Hmm, finally a way to see some details on the line. For posterity, here's what my not-so-spectacular 25/3.6 line shows:

Line Status : Port is in Showtime
Mode : 0x100000 (VDSL2 Profile 8A )
Upstream Payload Rate : 4032 kbps
Downstream : 26928 kbps
DIAG Info:
Attenuation ( dB ) : 32.6 0.00 (FE LATNpb-0)
47.90 (FE LATNpb-1)
0.00 (FE LATNpb-2)
0.00 (FE LATNpb-3)
0.00 (FE LATNpb-4)
SNR margin ( dB ) : 16.6 0.00 (FE SNRMpb-0)
5.60 (FE SNRMpb-1)
0.00 (FE SNRMpb-2)
0.00 (FE SNRMpb-3)
0.00 (FE SNRMpb-4)
US Aggregate Power : 7.9 dbm
DS Attainable Data Rate: 50216 kbps
US Attainable Data Rate: 4248 kbps
HEC counter : HEC_F:0
CRC counter : CRC_F:0
CRC_S: 0

Extended Port Status
Bme: 1 Port: 1
Downstream line rate: 31148 kbps
Upstream line rate: 4656 kbps
Bearer0 Downstream payload rate: 0 kbps
Bearer1 Downstream payload rate: 26928 kbps
Bearer0 Upstream payload rate: 0 kbps
Bearer1 Upstream payload rate: 4032 kbps
Downstream attainable payload rate: 50216 kbps
Downstream attainable line rate: 61248 kbps
Downstream Training Margin: 18.7 dB
Downstream Line Protection (Bearer1 Path): 0.0 DMT Symbols
Upstream Line Protection (Bearer1 Path): 0.0 DMT Symbols
Near-end ITU Vendor Id: 0xb500494b4e530200
Far-end ITU Vendor Id: 0xb500494b4e530100
Downstream delay: 0.0 ms
Upstream delay: 0.0 ms
Tx total power 7.9 dbm
FE Tx total power 13.3 dbm
VDSL Estimated Loop Length : 3029 ft
G.Hs Estimated Near End Loop Length : 2604 ft
G.Hs Estimated Far End Loop Length :2891 ft
Current framing mode: 0x10 EFM
Bandplan Type...........: 2
No. of Upstream Bands...: 1
No. of Downstream Bands.: 2
Line Type: 0x00100000 VDSL2 Profile 8A
Downstream FFT Protection (Bearer1 Path): 0.0 DMT Symbols
Upstream FFT Protection (Bearer1 Path): 0.0 DMT Symbols
Upstream Line Attenuation: NA (Only for ADSL1 & T1.413)
Upstream SNR Margin: NA (Only for ADSL1 & T1413)
Upstream Retransmission status: Disabled
Downstream Retransmission status: Disabled