|
to hobgoblin
Re: TW going "crazy" tonight?said by hobgoblin:"Inside sources tell me with regard to the slow searches that a Speed Boost fix is coming. And, OMG do the boxes need it!"
A patch was loaded on the ODN boxes in Buffalo this week. It did indeed take care of the the slow search issue.
Hob Roc getting it thing coming week, I would assume? |
actions · 2012-Jul-28 1:52 pm · (locked) |
hobgoblinSortof Agoblin Premium Member join:2001-11-25 Orchard Park, NY |
"Roc getting it thing coming week, I would assume?"
Already got it.
Hob |
actions · 2012-Jul-28 7:39 pm · (locked) |
|
said by hobgoblin:"Roc getting it thing coming week, I would assume?"
Already got it.
Hob Thanks, now I see where it says 5.2.0_9. I don't recall my boxes rebooting this week, but obviously they must have. It sucks that the Select+Down Arrow diagnostic screens are gone now. It took me a while to find the firmware version info in the other set of diag screens. |
actions · 2012-Jul-29 12:17 pm · (locked) |
hobgoblinSortof Agoblin Premium Member join:2001-11-25 Orchard Park, NY |
Select and Up works for me.
Hob |
actions · 2012-Jul-29 8:52 pm · (locked) |
|
said by hobgoblin:Select and Up works for me.
Hob This works in any box? |
actions · 2012-Jul-29 9:57 pm · (locked) |
hobgoblinSortof Agoblin Premium Member join:2001-11-25 Orchard Park, NY |
"This works in any box?"
I think Steve has the same Cisco box as I do here at home and my reply was to him. I have not tested on other makes in the WNY market.
Hob |
actions · 2012-Jul-30 6:43 am · (locked) |
|
I tried it with the samsung box and it works but the diagnostics screens, not unless I miss it, did not show what ODN version is running. Does it? Thanks. |
actions · 2012-Jul-30 11:09 am · (locked) |
|
to hobgoblin
said by hobgoblin:Select and Up works for me.
Hob Yup, Select + Up works, prior to ODN 5 the only way you could access those screens IIRC, was pressing Vol+ and Info on the front of the box. But anyhow, like I posted, Select + Down no longer works ever since the 5.2. It sucks, that was an easy way to check versions, last boot time, Tune Failures and what I liked doing, accessing the hard drive info and seeing the exact usage and calculating the average bitrate for recorded content on the DVR. I know most, if not all of that information can be accessed with the other menus, but the Select + Down screens were better laid out, I think. |
actions · 2012-Jul-30 4:47 pm · (locked) |
hobgoblinSortof Agoblin Premium Member join:2001-11-25 Orchard Park, NY |
to bluepoint
said by bluepoint:I tried it with the samsung box and it works but the diagnostics screens, not unless I miss it, did not show what ODN version is running. Does it? Thanks. Page 10/39 on the MFR Diags shows the versions here on my Cisco. Hob |
actions · 2012-Jul-30 9:25 pm · (locked) |
|
No MFR Diags menu in the samsung. There is a diagnostics item in the extended diagnostic menu but it's asking for a password. Do you know what's the password? |
actions · 2012-Jul-30 11:46 pm · (locked) |
hobgoblinSortof Agoblin Premium Member join:2001-11-25 Orchard Park, NY |
said by bluepoint: Do you know what's the password? I dont, but even if I did I would not post passwords on a public site! I like my job. Hob |
actions · 2012-Jul-31 5:44 pm · (locked) |
|
No big deal, just thought it's openly available to us. |
actions · 2012-Jul-31 6:34 pm · (locked) |