| reply to Subaru
Re: Looking for a hard to find bolt said by Subaru:Maybe I'm searching wong on McMaster carr but I can't find this bolt..
M12 x1.25 17 mm
Are you sure the pitch is 1.25mm? All of the M12 hardware I'm finding, including on your later post is 1.75 pitch. I'm confused. |
|
|
|
 The PigI know you want to be mePremium
join:2009-09-11 | reply to Subaru
said by Subaru:before I order I'm sure nether Lowes or Home depot
You'll never know until you go to either one, I think Home depot will have a better supply of bolts on hand! |
|
 Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | I went and they don't have it |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | reply to tedmarshall
it is 1.25mm in pitch
I have to check the bolt again in person I hope it shows the grade marking on it because a grade 10.9 looked a bit thin too. |
|
 AlakarFacts do not cease to exist when ignored
join:2001-03-23
Milwaukee, WI | reply to Subaru
Why not just get a slightly larger, easy to find bolt and tap the nut for the new size and thread pitch? |
|
 49528867Premium
join:2010-04-16
Fort Lauderdale, FL
kudos:3 | reply to Subaru
said by Subaru:Maybe I'm searching wong on McMaster carr but I can't find this bolt..
M12 x1.25 17 mm Can you work with a 20mm?
»www.coxhardware.com/p-1154-m12-x···aspx?p=M
»www.reidsupply.com/sku/ROC-2802-752/
Wayne
--
Madness takes its toll, please have exact change ready… |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | Have one with a flange head? |
|
49528867Premium
join:2010-04-16
Fort Lauderdale, FL
kudos:3 | said by Subaru:Have one with a flange head?
What is that?
Wayne
--
Madness takes its toll, please have exact change ready… |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | »www.nuttybolts.com/catalog/image···r-5Z.jpg |
|
49528867Premium
join:2010-04-16
Fort Lauderdale, FL
kudos:3 | said by Subaru:http://www.nuttybolts.com/catalog/images/BFS-Flange%20Bolt%20Serr-5Z.jpg
Thats' a built in lockwasher you can replace that type of bolt with a standard bolt plus a standard lockwasher.
Wayne
--
Madness takes its toll, please have exact change ready… |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | well that's just a quick random picture I found but I wont be using that one with the built in lock. |
|
49528867Premium
join:2010-04-16
Fort Lauderdale, FL
kudos:3 | said by Subaru:well that's just a quick random picture I found but I wont be using that one with the built in lock.
Then use a bolt with a washer, it is common for assembly line purposes to use less parts that can be misplaced and combining a bolt with a washer is one of those methods of speeding up the assembly process.
Find the bolt you need and combine it with a washer and you have the same thing just two parts to loose versus one. 
Wayne
--
Madness takes its toll, please have exact change ready… |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | It would have to be a nut on the other end because I don't trust it.. mind you this is a bolt that spec to about 103 Ft-lbs I rather trust a nut on the inside instead of just the bolt it's self.
funny thing was I was looking at some bolts I for sure can't use grade 8 but I think 10.9 is more like it.. speaking of that let me go out now to see if the bolt has a marking on it. |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | reply to Subaru
Just came back and the bolt head is marked as grade 8 |
|
49528867Premium
join:2010-04-16
Fort Lauderdale, FL
kudos:3 | said by Subaru:Just came back and the bolt head is marked as grade 8 Then next?
Wayne
--
Madness takes its toll, please have exact change ready… |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | I assume metric bolts marked with a large 8 means grade 8? Most findings show it marked as like 8.8 OR marked with lines. |
|
49528867Premium
join:2010-04-16
Fort Lauderdale, FL
kudos:3 | said by Subaru:I assume metric bolts marked with a large 8 means grade 8? Most findings show it marked as like 8.8 OR marked with lines.
Maybe this helps.
»www.dansmc.com/torque_chart.htm
Wayne
--
Madness takes its toll, please have exact change ready… |
|
Subaru1-3-2-4Premium
join:2001-05-31
Greenwich, CT | hmm maybe the bolt is in the wrong spot.. but I doubt it |
|
| reply to Subaru
Try this company. They should be able to help you out.
»www.all-techspecfast.com/
--
Gadgets |
|
 Coma Thanks StevePremium
join:2001-12-30
NirvanaLand | reply to Subaru
said by Subaru:hmm maybe the bolt is in the wrong spot.. but I doubt it
A grade 8 bolt for a transmission support is more than enough and if you have room, put a lock nut on it.
--
August is National Eye Exam Month |
|
