[Wireless] Using a wrt54gl as AP to E3000...
Looking for some instruction on setting up a wrt54gl as an access point to a E3000. The wrt54gl has stock firmware. Now one of the things is we are using the wrt54gl as a wired interface to a Bryston BDP-1 which we have working ok. I have found trying to setup the wrt54gl as an AP if I turn off DHCP the Bryston can't be connected to. So any help would be greatly appreciated. Any other info needed please ask.
Does connecting any other device to the wrt54gl while it's in AP mode work?
If not, then it's likely the 54gl isn't working correctly (I haven't used stock firmware in a long time but I assume setting into AP mode is simple).
If so, then likely an issue with the Bryston.
*This is all assuming the e3000 has devices connected to it fine using dhcp.