 RR ConductorNWP RR Inc.,serving NW CAPremium
join:2002-04-02
Redwood Valley, CA
kudos:1
4 edits | reply to Ripper
Re: [Connectivity] Zoom 5341j firmware upgrade. said by Ripper:I have tried the reset button a number of times,but US light still blinks.
Mine's been doing that on and off for a couple of months now, it doesn't affect anything though, so I don't worry too much about it. I haven't received any firmware updates on mine here either, mine is still on 5.5.4.4J .
Edit-Update, I powered it off and back on again, and now have the new software-
Software Version 5.5.4.9J
Wed Aug 08 22:53:38 2012 Notice (6) SW download Successful - Via Config file
Wed Aug 08 22:50:36 2012 Notice (6) SW Download INIT - Via Config file d11_m_5341j_speedtierextreme |
|
 RipperPremium
join:2002-02-07
West Palm Beach, FL | So it started blinking when you got bonded upstream channels? Mine started blinking when I got multi upstream channels,but my connection is fine,and upload speed is a little faster. |
|
RR ConductorNWP RR Inc.,serving NW CAPremium
join:2002-04-02
Redwood Valley, CA
kudos:1 | ............ |
|
RR ConductorNWP RR Inc.,serving NW CAPremium
join:2002-04-02
Redwood Valley, CA
kudos:1 | reply to Ripper
No, after it sometime, I can't remember exactly when. I have two bonded upstream channels, and 8 bonded downstream channels. |
|
MattftlaudPremium
join:2012-02-07
Fort Lauderdale, FL | Before the firmware upgrade i had downstream signal levels around 1-3 dbmv but ever since the upgrade my 192.168.100.1 modem page shows downstream signal levels now up to 5-6dbmv. Can firmware be off when it comes to detecting the exact signals or maybe the old or new firmware is off?
I moved into this new apartment a few months ago and my downstream power levels were always at 1-3dbmv until this firmware upgrade on my zoom modem. Downstream SNR is around 41-42 (same as before upgrade) and upstream power levels are 39-40 (again, same as before upgrade). |
|
Reviews:
 ·Cox HSI
| Always remember modem's only try to judge signal levels. So there not exactly accurate, and it's possible with the firmware update, it judges signal levels a little different. Still being at 5-6db on the power level is ok, and really nothing to worry about atm. Still you don't want that to keep rising though. Also I have seen where the modem reboots, and once it locked back online power level's being a little different. |
|
