|reply to noah86 |
Re: [DD-WRT] Cisco M20 + WRT54G
Did you read the link. It literally gives a step-by-step process of how to set up both routers.
Since you want to extend wireless signal and connect over wireless, and have clients on both devices see each other, you need to be doing repeater bridge mode.
I'm guessing you didn't do the following. You need to assign yourself an IP+Sub+Gateway while connected to the repeater router (2nd router, WRT54G) to set it up, since it will have DHCP turned off on the repeater and it will not be connected to your host yet. Once connected, manually set the IP, Subnet mask, Gateway address on the repeater router. I hope you also matched the wireless security settings on both routers.
Once they're linked you can turn on auto-DHCP on your computer instead of static IP.