dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
606

joepwpb
Premium Member
join:2000-12-15
West Palm Beach, FL

joepwpb

Premium Member

Modem and Router Settings

I recently replaced the modem with a Zoom 5341J and get 4 channel down and one up. So, my first question is should I be getting more than one channel UP and if so what should I do about it?

Second question is regarding IPv6 and my Netgear WNR2000 v3. I have several options in the Router such as Auto Detect, Auto Config and 6to4. How do I determine which of those options to choose?

All this is assuming that I have DOCSIS 3.0 and IPv6 in my area, West Palm Beach.

In advance of, Thanks !!

Joe P

pclover
join:2008-08-02
Santa Cruz, CA

pclover

Member

Chances are if you modem is only bonding one channel up you don't have more then one in your area.

Is there an option in your router that says DHCPv6-PD? Maybe the autoconfig will do that but unsure.

graysonf
MVM
join:1999-07-16
Fort Lauderdale, FL

graysonf to joepwpb

MVM

to joepwpb
AFAIK, you do not have native IPv6 in your area yet.

You could try 6to4 and see if it works or you could get an HE tunnel that will work.

joepwpb
Premium Member
join:2000-12-15
West Palm Beach, FL

joepwpb

Premium Member

said by graysonf:

AFAIK, you do not have native IPv6 in your area yet.

Looks like I don't have DOCSIS 3.0 either...
ExoticFish
join:2008-08-31
Zebulon, NC

ExoticFish

Member

If you have bonded channels you have D3 AFAIK.