http://www.dslreports.com/forum/DSL-No-service-after-firmware-27429472 en Wed, 22 May 2013 17:03:26 EDT Wed, 22 May 2013 17:03:26 EDT http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27434585 http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27434585 Fri, 17 Aug 2012 10:36:04 EDT http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27434350
Call support and ask for a replacement.]]> http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27434350 Fri, 17 Aug 2012 09:36:04 EDT http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27433715 http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27433715 Fri, 17 Aug 2012 00:07:15 EDT http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27432122 http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27432122 Thu, 16 Aug 2012 15:46:31 EDT http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27429549
Yes it was bonded, I had sets of info for both DSL 1 and 2.]]> http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27429549 Wed, 15 Aug 2012 22:14:47 EDT http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27429524
The 12M package is one of the Bonded packages. Did they deploy it bonded?]]> http://www.dslreports.com/forum/Re-DSL-No-service-after-firmware-27429524 Wed, 15 Aug 2012 22:07:16 EDT http://www.dslreports.com/forum/DSL-No-service-after-firmware-27429472
I was having problems where after a few minutes of inactivity the "internet" light would turn red. If I logged into the modem it would turn green. I have a ticket for this, a tech is supposed to come by.

The new modem they gave me is a Zyxel P-663HN-51 which the phone rep didn't even have listed in his system.

In the mean time I thought I'd try a firmware update. Got the only one on the Zyxel website, date 2010. Now DSL2 flashes continuously and the internet light is always red.

I noticed under the advanced settings that it had kicked out my username/password with the firmware update so I'm assuming it's a setting somewhere causing this.

I've got it set up as

VPI 0
VCI 35
ubr without PCR
PPPoE LLC
username@frontier.com
PPPoE service name I left blank

This modem has a diagnostics page, here's what's listed

Test your ENET(1-4) Connection: FAIL
Test your Wireless Connection: PASS

Test ADSL Synchronization: PASS

Test PPP server connection: FAIL
Test authentication with ISP: PASS
Test the assigned IP address: FAIL
Ping default gateway: FAIL
Ping primary Domain Name Server: PASS]]> http://www.dslreports.com/forum/DSL-No-service-after-firmware-27429472 Wed, 15 Aug 2012 21:52:00 EDT