[Config] CME 8.6 SIP Trunk, brand new setup, constantly getting
Hi everyone, I'm setting up a new CME (8.6) on a 3825 running 15.1(4)
I'm migrating from CME 4.0.1
I've basicly set the same config with some little modification (using ephone overlay feature) I've however removed it from the ephone i'm using to test my new CME setup.
Basically the SIP-UA is registered, the ephone are registered but when I call from PSTN, the CME sends back a 403, disconnect cause 15 to the SIP provider. I'm running in circle as for why a cause 15 when the ephone is registered???
The dial-peer in question is "dial-peer voice 2 voip" and the ephone is the ephone 31.
here a few outputs;
and finally a call trace