[Equipment] Help unlocking RTP300
Hi there! I've followed all the instructions contained in:
»[Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04
got everything set up, used the hex editor to ready for unlocking my RTP300 (from steps in 4 below), but when I tried to ping, this is the error I get:
Invalid IP address 127.0.0.1 &&cd /var/tmp &&wget tftp://192.168.15.100/wr
any suggestions on what I am doing wrong?
You should post in the »VOIP Tech Chat forum.
Anyways, what's your current firmware version ? My guess is you're either on the Vonage 12.0.1 firmware (where they disabled the feature) or it's not a Vonage firmware at all and you should use a different method.
If you have JTAG and serial console cable, you can use the instructions on my site at »voipfan.net/unlock/ which works for any version.
Providers: voip.ms, freephoneline, smartcall.ro through asterisk. Hardware: Vonage VDV21, Moto VT2x42, Linksys SPA series, Grandstream HT series, Panasonic KX-TGP5x0