dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
13
share rss forum feed


retiredqwest

join:2005-04-01
Spokane, WA
reply to Nemesis158

Re: [Qwest] Centurylink upgrades speeds, but service is horrible

I was almost going to guess down south of town.....

I checked a few addresses near the dslam and got 1.5 meg as the only speed. Which means there is no fiber there at all. So they must be all ADSL dslams, without looking inside them I can only guess how many ports they have.

Moran C.O. is at 57th and Regal, to give you an idea as to how far they would have to place fiber to that remote. I'm not all that familiar with down south, but I do know there are a lot of cables that go cross country rather than follow roads. I do know that cables leave Moran in NSEW routes. Hangman Valley area is fed via Palouse Highway then down Baltimore Rd.

To get to 12618 Sherman, the feed either comes across Gibbs Rd and then south or maybe across Paradise Rd and then north.

There is a remote pair gain near Paradise and Keeney Rd, that feeds a KJRB antenna site on E. Stutler Rd.

If you are truly fed out of 12618 Sherman then your chances of getting more than 1.5 meg are extremely slim unless they place fiber closer to you and a cross connect point and of course commercial power.

And the remote pair gain on Sherman is probably an old SLC-96 that cannot utilize fiber.... copper T1 only for the feed.

Since I don't have company intranet access I can't do anything else.


Nemesis158

join:2012-09-15
Spokane, WA

Moran CO is where my Internet originates. i did some digging around along time ago and found that. from there my guess would have to be that there is a fiber line running down hatch to 195, then immediately turning off on White rd (or comes down the hill not following hatch, and crosses the highway). it follows white rd until it hits cedar road, and about 100ft down the road it goes into a larger DSLAM at 8101 S Cedar road. my guess would then be that it follows the T1 circuit down cedar until taylor or gibbs (gibbs more likely), then over to sherman and down to my terminal. that route makes the most sense


Nemesis158

join:2012-09-15
Spokane, WA
reply to retiredqwest


area map
Ive made a little map here. this is the Wireline download map from Wabroadbandmapping.org, with markers of hardware and lines of cable routes.
red lines are known cable routes, while black and grey are the ones that are unknown, since they aren't marked any better.
I have to say that im 99% sure i am served by the sherman terminal, because NOANET and the Port of Whitman County were laying a fiber line down the road and they tore the whole copper carrier line for my whole neighborhood out of the ground just up the road along that dark red line. there are other terminals up on Cheney-Spokane road, but knowing that Moran CO is where my stuff comes from it just would make sense that the route doesn't follow those.

whats really odd is that centurylink reported to the site that they can serve 10-25 (most likely 12 or 15 max) across the street from me, and my phone line originates on the other side of the road. i dunno.......


retiredqwest

join:2005-04-01
Spokane, WA

I'll just say this, I'm not impressed by the accuracy of that website.....

Fiber west on 57th down Hatch and West on White would make more sense to get to Sherman. If you want grab some photos of the boxes at Cedar and White, I'm going to guess the large box on the field side is a Litespan 2000 which is only fiber fed.


CenturyLink
VIP
join:2009-03-09
Boise, ID
kudos:7
reply to Nemesis158

Hi,

We would be happy to help with your questions on your service if you email us your information talktous@centurylink.com

Thanks,

Corey Tidwell
talktous@centurylink.com
Centurylink Help Team


Nemesis158

join:2012-09-15
Spokane, WA
reply to retiredqwest

Click for full size
The Terminal at White & cedar
here is a pic of the large terminal on cedar.
code on the main box is:
SPKNWA RPH01
RT S8223 CEDAR

it says Binford 2000 under the code/adress.

I was able to catch a guy working at this terminal when i went to town today, so i told him what was going on and he said he would check it out and see if i needed to be moved to another gateway/dslam

The large box on sherman says Northern Telecom on it.


NormanS
I gave her time to steal my mind away
Premium,MVM
join:2001-02-14
San Jose, CA
kudos:11
Reviews:
·SONIC.NET
·Pacific Bell - SBC

said by Nemesis158:

The large box on sherman says Northern Telecom on it.

»en.wikipedia.org/wiki/Northern_Telecom

Equipment manufacturer.
--
Norman
~Oh Lord, why have you come
~To Konnyu, with the Lion and the Drum


retiredqwest

join:2005-04-01
Spokane, WA
reply to Nemesis158

Binford 2000 is a local joke..... Tim the Tool Man....anyway.

At Cedar The big cabinet in the back is a Litespan 2000 fiber fed. And looks like the fiber stops there. On the right is a x-connect box. The light green cabinet street side is a splice chamber. And the vented cabinet is the ADSL cabinet fed with fiber. The white cabinet on the left looks like an old N1 analog carrier repeater. Don't know why that is still there.

At Sherman the RPG is a NT DSMUrban. The 3 other vented cabs are ALL ADSL fed from the Cedar Litespan via copper T1's. And they all have 8 T1 feeder capability, don't know if they are all active.

And at Keeney and Paradise is a SLC-96 with no ADSL cabinet.

So, at Sherman you might see if you can get someone to cut your DSL line to a different system since there are 3 of them there. And a outside tech has to redo the jumpers at the x-connect.

One thing I noticed is there is no VDSL2+ node at Cedar, which makes sense since 40M/5M only reaches out about 2000 wire feet from the node. I did some unscientific calculations on my neighborhood since I know the routes of the cabling. Each situation will vary because of cable gauging.

At Cedar I tried an address about 1000 ft south on Cedar Road and it came back 20M/896K. But what caught me off guard is it is ADSL. I only tried the one address since I'm not positive about the cable routing down there.


Nemesis158

join:2012-09-15
Spokane, WA

what i don't quite get is why there is only one adsl cabinet at the cedar terminal and 3 at the Sherman terminal. is it dependent on what is feeding them?

Also, im not sure but i think the guy may have figured out what was going on, at least partially. im getting almost 3.3 on speetest at 1pm, and that's like unheard off. the samknows graph also started out much more consistent today. time will tell i guess.



retiredqwest

join:2005-04-01
Spokane, WA

said by Nemesis158:

what i don't quite get is why there is only one adsl cabinet at the cedar terminal and 3 at the Sherman terminal. is it dependent on what is feeding them?

Comcast provides service around Cedar and White. I don't know how far south they go. Supply and demand and there is always the ROI......


Nemesis158

join:2012-09-15
Spokane, WA

well im not sure if it means anything, but on thursday morning our internet got disconnected, and reconnected a little while later. problem is, currently its stuck at 0.8mbit down / 0.6mbit up.
these values are the same as those we saw during the 4 days before it was upgraded. is this some kind of line test phase or is it just setup incorrectly?