dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
share rss forum feed

TXFiber

join:2012-09-25
reply to SDL L3Tech

Re: East Texas - slow speeds, high latency

I am having the same problems as this customer, and I sent you a message about it on the form. Can you please fix this same problem for me as well SDL L3Tech?


SDL L3Tech

join:2011-06-07
Tyler, TX
kudos:28
I received your PM TXFiber. Please retest.

My tests BEFORE:

To Dallas
ping 173.192.68.18 source 75.109.96.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 173.192.68.18, timeout is 2 seconds:
Packet sent with a source address of 75.109.96.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/39/40 ms

To houston
ping 69.241.80.166 source 75.109.96.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 69.241.80.166, timeout is 2 seconds:
Packet sent with a source address of 75.109.96.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 64/64/68 ms

=============================

My tests AFTER:

To Dallas
ping 173.192.68.18 source 75.109.96.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 173.192.68.18, timeout is 2 seconds:
Packet sent with a source address of 75.109.96.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/7/8 ms

To Houston
ping 69.241.80.166 source 75.109.96.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 69.241.80.166, timeout is 2 seconds:
Packet sent with a source address of 75.109.96.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms