dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
10
jt25741
join:2008-12-21
Aliso Viejo, CA

jt25741

Member

Re: [CA] SB6180 has only 3 Bonded Channels down and 1 up

Also...I noticed my correctables keep incrementing on channel 1:

Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 211 579000000 Hz 0.0 dBmV 39.9 dB 2091 4
2 Locked QAM256 212 585000000 Hz 0.0 dBmV 39.9 dB 1 0
3 Locked QAM256 213 591000000 Hz 0.0 dBmV 39.0 dB 0 0
4 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
5 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
6 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
7 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0
8 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0

Correctables Uncorrectables
2297 4

This is not normal, is it?

SHoTTa35
@optonline.net

SHoTTa35

Anon

Expected also, 4 uncorrectables are what matters. If that number was sky high then you have a bigger issue.

On my 6180 (different ISP) i have a few thousand uncorrectables, this is after 1 week however.
lilstone87
join:2009-04-09
Chesapeake, VA

lilstone87 to jt25741

Member

to jt25741
Yes it is normal on downstream channel one, as there is a bug in the gui of the 6180, and when you leave the modem page open. It will continue to add up codewords, until you close the modem page. It's a known bug, and there just hasn't been an updated firmware yet to fix this small bug.