dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
7404
share rss forum feed

sunday8pm

join:2010-05-24
Reviews:
·Bell Sympatico
·voip.ms

Sagemcom f@st 2864 and DMZ

Hi all,

I am trying to put a computer in the DMZ of the sagemcom fast 2864. I go to network > DMZ and put it's IP there.
I press sav, it says settings saved but when I go back to the page the field is empty again, like in the screen cap.

I think I remember it was not like that before, and if I put something in the DMZ then it would still be displayed in the IP address field when coming back to the page.

Can anyone confirm this?




Paolo
Mr. Wireless

join:2004-05-29
canada

it will show up in the dhcp tab, it will have the device mac, and it will show an external public ip instead of the internal ip.
--
Happiness is like peeing your pants... Everyone can see it, but only you can feel its Warmth!!


sunday8pm

join:2010-05-24
reply to sunday8pm

This is what I have in the DHCP table


a_mckie

join:2012-08-31
East York, ON
reply to sunday8pm

It's not just you. I have a device set up as the DMZ IP address and it doesn't display for me on the DMZ screen either. But based on network behaviour I'm pretty sure it's working. I'd have to check but I think I even found relevant coding in the HTML source of that admin page but it's suppressed in the rendering for some reason.



Paolo
Mr. Wireless

join:2004-05-29
canada

try a different browser and maybe it'll show up


scarswell

join:2010-05-14
Richmond Hill, ON
reply to sunday8pm

I just got this Sagemcom a couple of months ago, DMZ is NOT working properly.



Paolo
Mr. Wireless

join:2004-05-29
canada

thats cus you need to be in the DMZ page, not DHCP of the "connection hub" modem.



Paolo
Mr. Wireless

join:2004-05-29
canada

also u can check if its active by going into the network devices page on your "Connection Hub" modem to see if its active and what ip it gets
--
Happiness is like peeing your pants... Everyone can see it, but only you can feel its Warmth!!


wfeddern

join:2012-08-14
reply to sunday8pm

Can someone explain what DMZ mode is actually doing/how to use it?

I have a firewall behind the sagecom, and a single static public IP. Do I put that public IP in the DMZ config box? and does that then get passed onto the firewall if I set the firewall for dhcp?

Trying to avoid a double-NAT situation.



jsmaster

join:2008-03-16
Montreal, QC

said by wfeddern:

Can someone explain what DMZ mode is actually doing/how to use it?

I have a firewall behind the sagecom, and a single static public IP. Do I put that public IP in the DMZ config box? and does that then get passed onto the firewall if I set the firewall for dhcp?

Trying to avoid a double-NAT situation.

DMZ will open all ports for the specified IP. SImple as that