Topic 'Re: Sagemcom f@st 2864 and DMZ' in forum 'Bell Canada' - dslreports.com

Re: Sagemcom f@st 2864 and DMZ

Fri, 07 Dec 2012 09:12:05 EDT

jsmaster posted :

Can someone explain what DMZ mode is actually doing/how to use it?

I have a firewall behind the sagecom, and a single static public IP. Do I put that public IP in the DMZ config box? and does that then get passed onto the firewall if I set the firewall for dhcp?

Trying to avoid a double-NAT situation.

DMZ will open all ports for the specified IP. SImple as that

Re: Sagemcom f@st 2864 and DMZ

Wed, 05 Dec 2012 11:26:49 EDT

wfeddern posted : Can someone explain what DMZ mode is actually doing/how to use it?

I have a firewall behind the sagecom, and a single static public IP. Do I put that public IP in the DMZ config box? and does that then get passed onto the firewall if I set the firewall for dhcp?

Trying to avoid a double-NAT situation.

Re: Sagemcom f@st 2864 and DMZ

Sun, 25 Nov 2012 16:52:37 EDT

Paolo posted : also u can check if its active by going into the network devices page on your "Connection Hub" modem to see if its active and what ip it gets
--
Happiness is like peeing your pants... Everyone can see it, but only you can feel its Warmth!!

Re: Sagemcom f@st 2864 and DMZ

Sun, 25 Nov 2012 16:51:40 EDT

Paolo posted : thats cus you need to be in the DMZ page, not DHCP of the "connection hub" modem.

Re: Sagemcom f@st 2864 and DMZ

Sun, 25 Nov 2012 16:22:24 EDT

scarswell posted : I just got this Sagemcom a couple of months ago, DMZ is NOT working properly.

Re: Sagemcom f@st 2864 and DMZ

Tue, 02 Oct 2012 15:44:56 EDT

Paolo posted : try a different browser and maybe it'll show up

Re: Sagemcom f@st 2864 and DMZ

Tue, 02 Oct 2012 09:25:55 EDT

a_mckie posted : It's not just you. I have a device set up as the DMZ IP address and it doesn't display for me on the DMZ screen either. But based on network behaviour I'm pretty sure it's working. I'd have to check but I think I even found relevant coding in the HTML source of that admin page but it's suppressed in the rendering for some reason.

Re: Sagemcom f@st 2864 and DMZ

Mon, 01 Oct 2012 20:38:58 EDT

sunday8pm posted : This is what I have in the DHCP table

Re: Sagemcom f@st 2864 and DMZ

Mon, 01 Oct 2012 10:41:04 EDT

Paolo posted : it will show up in the dhcp tab, it will have the device mac, and it will show an external public ip instead of the internal ip.
--
Happiness is like peeing your pants... Everyone can see it, but only you can feel its Warmth!!

Sagemcom f@st 2864 and DMZ

Sun, 30 Sep 2012 10:26:05 EDT

sunday8pm posted : Hi all,

I am trying to put a computer in the DMZ of the sagemcom fast 2864. I go to network > DMZ and put it's IP there.
I press sav, it says settings saved but when I go back to the page the field is empty again, like in the screen cap.

I think I remember it was not like that before, and if I put something in the DMZ then it would still be displayed in the IP address field when coming back to the page.

Can anyone confirm this?

[att=1]