|
alpreston to ruiner3
Anon
2012-Oct-5 9:19 pm
to ruiner3
Re: [AB] V1000H: unable to print to LAN printerbefore the new router arrived, I had it set up with a static IP on the DI-624, and tried to do the same with the Actiontec by assigning a static IP to the server's MAC address - which didn't work. It seems that the Actiontec is not seeing the device's MAC address. But I'll give it another try in case something wasn't right the first time. |
|
|
What you are talking about is a DHCP reservation not a static IP. You need to get into the print server's settings and manually enter an IP that is outside of the Actiontec DHCP range.
If the print server only has a web interface then you'll need to hook it back into the DI-624 how you were using it before so you can log in and set the static IP. |
|
|
alpreston
Anon
2012-Oct-8 7:07 am
I haven't been able to get into any settings on the print server box. It's supposed to be possible to telnet in IF there's a route between it and the computer - but of course, adding a route requires knowing the server's IP address .... As far as I've been able to discover, the print server doesn't have a web interface. |
|