| reply to HiVolt
Re: Bloor phub - Terrible connection As at about 18:50 today
Model: Cisco DPC3825
Vendor: Cisco
Hardware Revision: 1.0
Serial Number: xxxxxxxxxx
MAC Address: xxxxxxxxxxxxxx
Bootloader Revision: 2.3.0_R3
Current Software Revision: dpc3825-v302r125533-111108a-ROG
Firmware Name: dpc3825-v302r125533-111108a-ROG.bin
Firmware Build Time: Nov 8 18:12:42 2011
Cable Modem Status: Operational
Wireless Network: Enable
Cable Modem State
DOCSIS Downstream Scanning: Completed
DOCSIS Ranging: Completed
DOCSIS DHCP: Completed
DOCSIS TFTP: Completed
DOCSIS Data Reg Complete: Completed
DOCSIS Privacy: Enabled
Downstream Channels
Power Level:
Signal to Noise Ratio:
Channel 1:
0.0 dBmV
37.4 dB
Channel 2:
0.3 dBmV
38.0 dB
Channel 3:
0.2 dBmV
37.9 dB
Channel 4:
0.0 dBmV
37.5 dB
Channel 5:
-0.4 dBmV
36.8 dB
Channel 6:
-0.2 dBmV
37.6 dB
Channel 7:
0.0 dBmV
37.5 dB
Channel 8:
0.0 dBmV
37.1 dB
Upstream Channels
Power Level:
Channel 1:
44.9 dBmV
Channel 2:
45.6 dBmV
Channel 3:
45.1 dBmV
Channel 4:
44.6 dBmV
-------------------------------------------------
Ping has started…
PING rogers.com (207.245.252.27): 56 data bytes
64 bytes from 207.245.252.27: icmp_seq=0 ttl=120 time=30.912 ms
Request timeout for icmp_seq 1
64 bytes from 207.245.252.27: icmp_seq=2 ttl=120 time=29.954 ms
64 bytes from 207.245.252.27: icmp_seq=3 ttl=120 time=30.973 ms
64 bytes from 207.245.252.27: icmp_seq=4 ttl=120 time=31.995 ms
64 bytes from 207.245.252.27: icmp_seq=5 ttl=120 time=30.007 ms
Request timeout for icmp_seq 6
Request timeout for icmp_seq 7
64 bytes from 207.245.252.27: icmp_seq=8 ttl=120 time=31.062 ms
--- rogers.com ping statistics ---
10 packets transmitted, 6 packets received, 40.0% packet loss
round-trip min/avg/max/stddev = 29.954/30.817/31.995/0.693 ms |
