http://www.dslreports.com/forum/Basic-help-needed-USG-100-route-27597774 en Sat, 25 May 2013 08:40:51 EDT Sat, 25 May 2013 08:40:51 EDT http://www.dslreports.com/forum/Re-Basic-help-needed-USG-100-route-27599346 http://www.dslreports.com/forum/Re-Basic-help-needed-USG-100-route-27599346 Sun, 07 Oct 2012 20:01:10 EDT http://www.dslreports.com/forum/Re-Basic-help-needed-USG-100-route-27597951
In Configuration/network/zone, be sure that there are two zones for WANs and that there is no default zone that combines WAN1 and WAN2.

In Configuration/network/trunk, establish the LAN1 to WAN2 and LAN2 to WAN2 trunks. I assume that the zones you established in the zone menu will show up on the trunk menu.

Read both the rev 2.2 and 3.0 User Manuals multiple times in the related areas, as well as all the notes you can find on ZyXel's web site. The USG are not trivial routers to set up to tailored/bespoke configurations, although they do basic routing out of the box.

kirby]]> http://www.dslreports.com/forum/Re-Basic-help-needed-USG-100-route-27597951 Sun, 07 Oct 2012 10:12:48 EDT http://www.dslreports.com/forum/Basic-help-needed-USG-100-route-27597774
I'm noobie i need to do basic route or way to guide traffic
my goal WAN1 all traffic to LAN1 and WAN2 all traffic LAN2 i got 2 public IP:s lets say 83.145.200.20 and 83.145.200.21 both got got same GW IP witch is 83.145.200.254 and 2 different LAN,s 192.168.10.0/24 and 192.168.20.0/24 so i need all traffic WAN1 to LAN1 and WAN2 to LAN2 how i can do that help please thanks.

Rrds,

Vesa]]> http://www.dslreports.com/forum/Basic-help-needed-USG-100-route-27597774 Sun, 07 Oct 2012 08:04:47 EDT