how-to block ads
|
|
Uniqs:
7989 |
Share Topic
 |
 |
|
|
|
| reply to TSIElizabeth
Re: [OUTAGE] No Route in Nepean/ Stittsville I live in Barrhaven area and not affected by this outage, however, my modem log shows some maintenance done on last Wed. The Power level used to be around 7-8dbmv and BER were all 0, after maintenance, power level dropped to 3-4. I'll keep monitoring for awhile see if there is any issues
Wed Oct 10 07:55:41 2012 Critical (3) Received Response to Broadcast Maintenance Request, But no Un...
Wed Oct 10 07:55:04 2012 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=80:c6:ab:7f...
Wed Oct 10 07:54:52 2012 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC...
Wed Oct 10 07:54:42 2012 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=80:c6:ab:7f...
Wed Oct 10 07:54:22 2012 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC...
Wed Oct 10 07:54:18 2012 Critical (3) DHCP FAILED - Discover sent, no offer received;CM-MAC=80:c6:a...
Wed Oct 10 07:54:01 2012 Critical (3) Received Response to Broadcast Maintenance Request, But no Un...
Wed Oct 10 07:54:00 2012 Critical (3) Started Unicast Maintenance Ranging - No Response received - ...
Wed Oct 10 07:53:50 2012 Critical (3) SYNC Timing Synchronization failure - Failed to receive MAC S...
Wed Oct 10 07:52:50 2012 Critical (3) Received Response to Broadcast Maintenance Request, But no Un...
Wed Oct 10 07:51:43 2012 Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/Q...
Wed Oct 10 07:51:05 2012 Warning (5) MDD message timeout;CM-MAC=80:c6:ab:7f:6b:6c;CMTS-MAC=00:12:4...
Wed Oct 10 07:51:05 2012 Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/Q...
Wed Oct 10 02:48:29 2012 Error (4) DHCP RENEW WARNING - Field invalid in response v4 option;CM-M...
Mon Oct 08 13:14:10 2012 Error (4) ToD request sent- No Response received;CM-MAC=80:c6:ab:7f:6b:...
Mon Oct 08 02:48:27 2012 Error (4) DHCP RENEW WARNING - Field invalid in response v4 option;CM-M... | |
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
 ·Start Communicat..
 ·TekSavvy Cable
·TekSavvy DSL
| Looks sick. I wonder if that's what happens on the DCM475 modems with the old firmware (stac 02.08), causing them to not work well on the 8/4 channel bonding?
Is that the modem/firmware you have there?
If so, a firmware upgrade will likely cure it.
I do this service here in Bells Corners for Ottawa people with that modem.
Takes about 20 minutes, and I ask for $5 towards the cost of the flashing rig.
Message me if you want to get it done.
Cheers | |
|
