dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
1617
share rss forum feed

olive403

join:2012-10-10
Canada

[AB] V1000h Disable DHCP (another dhcp server on network)

SO i disabled DHCP (using another dhcp server on network) but the router is still blocking DHCP from the DHCP server

I disabled, NAT, firewall, DHCP server,

Even dlink, and the most basic routers would allow DHCP relay.

Tried actiontec and telus firmware

ANy suggestions? I am using this router as AP not as a gateway/router.
--
My ISP Speedtest
»www.speedtest.net/result/2234183 ··· 3999.png

olive403

join:2012-10-10
Canada
up date - one computer can get an IP (asus with intel 1000 BGN network card) - the speed is only 5.5 mpbs and there is just a wall between the two.. so much for range?

but not htc android incredbile.............
--
My ISP Speedtest
»www.speedtest.net/result/2234183 ··· 3999.png

annoyingrob

join:2007-03-27
Calgary, AB
reply to olive403
Is it just your wireless machines having problems? Do you have any wired devices to test with?

ruiner

join:2012-03-10
Canada
reply to olive403
You say you're using it as an AP only, so the other router is connected to the Actiontec on the LAN side? I used to have a setup like this and it worked fine for me.


rustydusty

join:2009-09-29
Red Deer County, AB
reply to olive403
Why not let the Actiontec do all DHCP, DNS requests, and use the Dlink as an AP only. Turn off DNS relay, DHCP, set a static to it that isn't used and let the Actiontec do all of the requests while the Dlink serves as a better AP. Extremely simple.