dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
2438

Davesnothere
Change is NOT Necessarily Progress
Premium Member
join:2009-06-15
Canada

4 edits

Davesnothere

Premium Member

Re: CallCentric Linksys ATA Screenshots

 
Note that the SIP Port number is BLANK in my screenshot in the OP.

Not sure of the significance, but I had decided on that setting thru a combination of learning previously what worked for Anveo, and from some other folks' advice about CallCentric, given just before I started this thread, but leaving that field blank was for some other reason (which I cannot recall ATM), rather than to solve any PAP2T ATA spontaneous reboots, as only some of the OBI ATAs had been rebooting as of then, IIRC.
Davesnothere

Davesnothere

Premium Member

 
As we again have been discussing which devices work with DNS SRV (and what settings to use) »[PBX] The new SRV Servers for CallCentric , here once more is a thread of some for Linksys.

Cheers !
taytong888
join:2005-06-20
Nepean, ON

taytong888 to Davesnothere

Member

to Davesnothere
Hello,

Would anyone offer a few screen shots for SPA-3102?

Thank you.

Davesnothere
Change is NOT Necessarily Progress
Premium Member
join:2009-06-15
Canada

2 edits

Davesnothere

Premium Member

said by taytong888:

Hello, - Would anyone offer a few screen shots for SPA-3102? - Thank you.

 
You HAVE been here »www.callcentric.com/supp ··· /spa3102 , right ?

While those settings do not reflect the most recent changes proposed by CC during the DDoS storm, they DO cover most of what I expect you will need (as a starting point), and then just refer to the PAP2T or SPA-2102 shots in the current thread for a few individual settings to transfer into server names, port numbers, timeout lengths, NAT settings, etc.

BTW, the settings which I posted in my OP screenshots here still seem OK.